Posted: Mon Sep 25, 2006 11:19 pm Post subject: LED wires
ok well im sure that people have seen the tutorial for making your xbox LED light half red half green. Well i was wondering which wires on the connector do what. Like what do each of the wires do, or in other words why does switching wires 7 and 8 make it half red? if some one could please help me it would be great. Thanx in advance
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Posted: Mon Sep 25, 2006 11:35 pm Post subject:
Take a look here, hopefully that helps. _________________
i know that but i dont want that i am doing sumthing else, and whanted to know if it was possible to make that color because i want to do something different. and how would i with the wires make it orange and blank??
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Posted: Tue Sep 26, 2006 12:55 am Post subject:
Blank? Cut the wires.
Orange? You need to activate both the wires no matter which ones are on. So you could just bridge the 2 points with some conductive ink, or solder a small wires across them. _________________
so wouldit be possible to make it four colors? like the left half red and blank, and the right half orange and green? and if i just dissconected one of the wires wouldnt iut make it blank?
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Posted: Tue Sep 26, 2006 1:07 am Post subject:
No, because there are just 2 LEDS, each one able to make 2 colors(three if both colors are one at the same time) _________________
unless i put little strips of plastice to seperate the circle into four parts and had the LEDs lined up with the four sectors that would make it the way i wanted you think?
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Tue Sep 26, 2006 10:08 pm Post subject:
if you want an idea for a jewel led mod, you can use a plastic lid to a container and poke little holes in it to set the leds in, theres many ideas and short cuts you can come up with if you have imagination, if you want a reflective surface on the lid, just use mac tack, or foil stickers etc... or make a custom image and glue it on if your gonna use a clear jewel, nothing is real difficult when it comes to led modding
Just lay it out and plan a head instead of diving in blind, if you want amulti-colored eject mod, i suggest getting the multi-color leds, they are just a tad bit more money, but the effect can be worth it, I do remember seeing a tut for that a while back. Just not sure where, im sure googling it will help. _________________
Nava Xbox-HQ Experienced
Joined: Sep 12, 2006 Posts: 152
Posted: Tue Sep 26, 2006 11:37 pm Post subject:
yeaa but im not talking about the jewel, im talking about the button on the front. i want it to be four diff colors, if not im going to make it white
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Tue Sep 26, 2006 11:42 pm Post subject:
then you probably want the tricolor led your standard RGB led, but wireing it in is going to be a chore, you may have to wire manual switches to change the colors.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum