Xenium made a very, very sick 1.6 adapter. It's got all the 1.6 rebuild points done and ready for ya. And honestly, if you have a 1.6, I think that adapter would be the ONLY way to chip your box, even over solder. It doesn't get much simpler.
See how it already sets up for the rebuild? It's sooooo hot!
But as far as for 1.0-1.5 boxes, I highly reccomend Xectuer's Newest Xapter adapter, shown below.
Solderless has definitely gotten better.
Both pictures linked from my personal site _________________ "That which does not kill you, only makes you stronger."
XBox - 1.1, Samsung 616t DVD-ROM, 65GBWD 7200RPM Drive, Logitech Wireless
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Wed Jul 19, 2006 7:59 pm Post subject:
enigma516 wrote:
I have an an adapter for a 1.6 that came with a Xenium Gold. I can send it to you if you want it.
I don't need it right now or anything like that, I was more discussing the 1.6 solderless adapters. But thanks for the offer, if I had a 1.6 to throw it in I would take you up on it.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Wed Jul 19, 2006 8:09 pm Post subject:
AngelosDracul wrote:
Xenium made a very, very sick 1.6 adapter. It's got all the 1.6 rebuild points done and ready for ya. And honestly, if you have a 1.6, I think that adapter would be the ONLY way to chip your box, even over solder. It doesn't get much simpler.
See how it already sets up for the rebuild? It's sooooo hot!
But as far as for 1.0-1.5 boxes, I highly reccomend Xectuer's Newest Xapter adapter, shown below.
Solderless has definitely gotten better.
No doubt about that, hence why I didn't mind with having a go at solderless. The Xenium 1.6 Adapter looks a lot more easier and less complicated than the Xeucter, so I know which adapter to get for a 1.6 now.
The 1.0-1.5 one looks quite nice too. Damn they must've only just brought these out, otherwise I would've got this one with my package (only got the blue one, but it still did the job fine).
AngelosDracul V.I.P. Lifetime
Joined: Mar 24, 2005 Posts: 1755
Posted: Thu Jul 20, 2006 1:20 am Post subject:
no, it all depends on where you ordered it from. I got mine from www.modchip.com I believe. The one based in FL with crappy customer service. Most dealers will go wtih the Xapter you have because it's cheaper, and they'll charge the same for it. I just got lucky and made sure I had the right package. _________________ "That which does not kill you, only makes you stronger."
XBox - 1.1, Samsung 616t DVD-ROM, 65GBWD 7200RPM Drive, Logitech Wireless
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Tue Oct 03, 2006 9:51 pm Post subject:
ive got the x3 myself(pinheader install) but its fragging, i believe i installed it cprrectly, went step by step here and it all seems to be right. I have 1 blue LED and 1 green LED light up. What do you think the problem is? _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Joined: Jul 15, 2006 Posts: 521 Location: Lockport, Illinois, USA
Posted: Wed Oct 04, 2006 12:41 am Post subject:
Hahaha DJB u should dust down your xbox i mean its cool that u cleaned off the LCP holes and everything but a full dust would be better _________________
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Wed Oct 04, 2006 2:10 am Post subject:
well its all cool with D0 unplugged, boots to stock bios, and no the backup does not work. Nothing works out for me except the damn softmod and hdd upgrade.....owell f#&@ it i guess ill just have to go back to softmod _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Wed Oct 04, 2006 2:21 am Post subject:
I bet I can get the sucker to work lol _________________
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Posted: Wed Oct 04, 2006 2:24 am Post subject:
Is it seated all the way down on the pinheader?
Cause that sucks, it has to be the chip itself. lemme check mine when I get home and see what lights show up _________________ Hotswap|HDD Upgrade|X3 Guide
impwiz V.I.P. Lifetime Xbox Version: all Modded: everything
Joined: Aug 30, 2005 Posts: 1070 Location: Detroit
Posted: Wed Oct 04, 2006 3:43 am Post subject:
I think there are 2 blue leds and a red one on the x3 itself. sounds to be the d0 wire is causing it. if the xbox boots to the ms dash when the d0 is disconnected, check your d0 location and soldering job. you should be able to give the wire a *small* tug and have it stay attached. Also, did you use the top or bottom of the motherboard for your d0? I suggest the bottom. _________________
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
Posted: Wed Oct 04, 2006 5:24 am Post subject:
i used the bottom, then tried the top, neither work, and its Two Blue and One Green, Red with flash protect on ;)yes i think it may be the D0 ot i dont know hot to get to the bios on the chip already? _________________ Hotswap Tutorial|FTP Tutorial|HyperX Flashing Tutorial
Greven Xbox-Hq Genius Xbox Version: Xbox V1.6 Modded: Xecuter 3 CE
Joined: Jan 19, 2006 Posts: 2755 Location: Calgary, Alberta, Canada
Posted: Wed Oct 04, 2006 5:52 am Post subject:
It should come pre-flashed with flashbios. If it didn't, you can use the softmod, boot to evox and flash that way. If thats what you want to do, let me know cause you'll have to edit your evox.ini file to recognize the x3 bios banks _________________ Hotswap|HDD Upgrade|X3 Guide
TheRealHypnotiX Moderator
Joined: Feb 01, 2006 Posts: 2508 Location: Pensacola, FL
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 9,594 | 
Guests: 752 | 
Members: 1 
Forums 
