cabbot Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 16, 2005 Posts: 748 Location: Ontario , Canada
Posted: Sun Apr 02, 2006 12:39 pm Post subject:
its sid4...but it was a hotswap install....i think it was nknave's HID disc basically....so it might not be exact same as sid4 through memory card.... _________________
gus738 Xbox-HQ Newbie
Joined: Aug 10, 2005 Posts: 1 Location: USA California Watsonville
Posted: Sun Apr 02, 2006 10:28 pm Post subject:
THANK YOU!!!! your real eeprom.bin is located on e/udata/21585554/00000000000/backup/eeprom.bin
see was that hard!!!!!!!!! thats why i asked you which eeprom you have..... theirs 2 eeprom.bins on sid 4 E/eeprom and e/udatata
e/eeprom is fake e/udata path isnt ! .... _________________ Xbox 360 Premium edition
2 wireless controllers
PGR 3
S E Blue Halo 2 Crystal Xbox
XBOX V1.4
Phillips DVD-ROM
UnleashX
200GB HD MAXTOR
savage0687 Xbox-HQ Newbie Xbox Version: XBOX V1.4 Modded: SID 4
Joined: Apr 02, 2006 Posts: 3 Location: Edmond
Posted: Mon Apr 03, 2006 2:17 am Post subject: Lock my drive
hey how do i lock my hardrive?
i have the error 5 message!
ne one know how to fix it?
cabbot Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 16, 2005 Posts: 748 Location: Ontario , Canada
Posted: Mon Apr 03, 2006 2:09 pm Post subject:
gus738 wrote:
THANK YOU!!!! your real eeprom.bin is located on e/udata/21585554/00000000000/backup/eeprom.bin
see was that hard!!!!!!!!! thats why i asked you which eeprom you have..... theirs 2 eeprom.bins on sid 4 E/eeprom and e/udatata
e/eeprom is fake e/udata path isnt ! ....
i keep tellin ya i dont have that folder..... _________________
LEE337 Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 01, 2005 Posts: 540 Location: Somewhere south of Seattle
Posted: Mon Apr 03, 2006 5:48 pm Post subject:
cabbot wrote:
LEE337 wrote:
I still say that I have the RIGHT solution!
Drop in the retail HDD and Un-Mount the Virtual C, then Backup the EEPROM, then FTP it to your PC and you are done!
how do i unmount the virtual c?
To Un-mount the Virtual C, you need to boot AID 3.0, go to the "Install Softmod" section. Near the bottom of that list you will find "Unmount Virtual C Drive", run that selection. It will take a few seconds then reload AID 3.0. Now you can Re-Backup your EEPROM.(and have the right one for sure ) _________________ I think I like fixing Boxes more than using them!
Naaaah!
-Lee
cabbot Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 16, 2005 Posts: 748 Location: Ontario , Canada
Posted: Tue Apr 04, 2006 7:31 pm Post subject:
LEE337 wrote:
cabbot wrote:
LEE337 wrote:
I still say that I have the RIGHT solution!
Drop in the retail HDD and Un-Mount the Virtual C, then Backup the EEPROM, then FTP it to your PC and you are done!
how do i unmount the virtual c?
To Un-mount the Virtual C, you need to boot AID 3.0, go to the "Install Softmod" section. Near the bottom of that list you will find "Unmount Virtual C Drive", run that selection. It will take a few seconds then reload AID 3.0. Now you can Re-Backup your EEPROM.(and have the right one for sure )
is this safe to do? can i remount it or whatever? _________________
gus738 Xbox-HQ Newbie
Joined: Aug 10, 2005 Posts: 1 Location: USA California Watsonville
Posted: Tue Apr 04, 2006 7:35 pm Post subject:
to unmount it ? yes it is ..... but dont do anything else stupid..... _________________ Xbox 360 Premium edition
2 wireless controllers
PGR 3
S E Blue Halo 2 Crystal Xbox
XBOX V1.4
Phillips DVD-ROM
UnleashX
200GB HD MAXTOR
Joined: Jul 13, 2005 Posts: 866 Location: Kansas City MO
Posted: Tue Apr 04, 2006 7:51 pm Post subject:
Error 6= wrong eeprom locked with, since the xbox cannot unlock with it's own serials.
Error 7= jumper settings most likely, and keep your jumper at CS, no other.
If you got error 6, it defenetly means you used the wrong eeprom. now unlock the hdd with that disc, and get your real eeprom and redo the linux disc or diskette to lock again. _________________ Xbox v1.1
TSOP EvoxM8+ 1mb
Avalunch SAC skin
Hitachi LG DVD-ROM
300 GiG Maxtor HDD
LEE337 Xbox-HQ Freak Xbox Version: XBOX V1.4 Modded: SID 4
Joined: Dec 01, 2005 Posts: 540 Location: Somewhere south of Seattle
Posted: Tue Apr 04, 2006 8:26 pm Post subject:
cabbot wrote:
is this safe to do? can i remount it or whatever?
After you get a copy of your EEPROM, then you can Re-SoftMod and it will be fine. _________________ I think I like fixing Boxes more than using them!
Naaaah!
-Lee
cabbot Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 16, 2005 Posts: 748 Location: Ontario , Canada
Posted: Wed Apr 05, 2006 3:14 am Post subject:
nknave wrote:
Error 6= wrong eeprom locked with, since the xbox cannot unlock with it's own serials.
Error 7= jumper settings most likely, and keep your jumper at CS, no other.
If you got error 6, it defenetly means you used the wrong eeprom. now unlock the hdd with that disc, and get your real eeprom and redo the linux disc or diskette to lock again.
do you remember where my right eeprom would be? i searched all the folders im pretty sure...should i do the unmount thing? _________________
cabbot Xbox-HQ Freak Xbox Version: 1.1 Modded: SID4.5
Joined: Dec 16, 2005 Posts: 748 Location: Ontario , Canada
Posted: Fri Apr 07, 2006 10:37 pm Post subject:
cabbot wrote:
nknave wrote:
Error 6= wrong eeprom locked with, since the xbox cannot unlock with it's own serials.
Error 7= jumper settings most likely, and keep your jumper at CS, no other.
If you got error 6, it defenetly means you used the wrong eeprom. now unlock the hdd with that disc, and get your real eeprom and redo the linux disc or diskette to lock again.
do you remember where my right eeprom would be? i searched all the folders im pretty sure...should i do the unmount thing?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,670 | 
Guests: 1358 | 
Members: 0 
Forums 
your real eeprom.bin is located on e/udata/21585554/00000000000/backup/eeprom.bin
thats why i asked you which eeprom you have..... theirs 2 eeprom.bins on sid 4 E/eeprom and e/udatata
I still say that I have the RIGHT solution! 
)
