I run InstallerX_XTC-Version_for_xbox-torrentz
and tried to flash my bios. When i started to flash it
i got this error. Couldnt write to bios. I figured out that
i hadnt removed the Write protection of the Xecuter chip.
I shuted down my xbox and removed it. When i fixed that
and started to boot the xbox up again i got error code 13.
I started to surf the net and get answers. Then i found this
xbox-hq autoinstaller. I Downloaded it and tried it on the xbox.
When using that one i got to Error Code 14.
What can the problem be here?
//andy
Last edited by grxAndy on Thu Sep 09, 2004 3:22 pm; edited 1 time in total
revolver944 V.I.P. Lifetime
Joined: May 16, 2004 Posts: 122 Location: virginia
Posted: Thu Sep 09, 2004 2:02 pm Post subject:
first try locking your hard drive with the installer. _________________ XBOX360
DE-FUCKIN-STROY!!
grxAndy Xbox-HQ Newbie
Joined: Sep 08, 2004 Posts: 4
Posted: Thu Sep 09, 2004 3:07 pm Post subject:
How can i do that? I cant get anything to boot from dvd-r
Besides, its a original hard drive!!!
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Thu Sep 09, 2004 8:57 pm Post subject:
Okay, error codes 13 and 14 are both dashboard related.
Here in my opinion is what may be happening. Firstly, you autoinstaller that you downloaded is obviously not booting up. Your modchip's bios is attempting to boot up a dashboard that either does not exist or has issues.
What bios did you flash to your Xecuter Chip?
Basically, the MS Bios is going to look for the MS Dash files at the C Drive. If you have the retail HD then those files should be intact unless you somehow modified them, but you made no mention of doing so.
A hacked bios is going to attempt to look for a hacked dashboard/dash files at the C Drive.
Your system will not boot up an autoinstaller disk, because until you have a properly flashed chip with a hacked bios, your system WILL NOT run unassigned code (Xbox-HQ Autoinstaller).
I am sure with some more information someone if not myself will be able to help you further. I have never tried flashing a Xecuter Chip, but if you let everyone know what chip you installed and what bios you are flashing to it maybe someone can have a more definitive answer. Also, even though you obviously have a locked HD, it is still possible to lock HD's without an autoinstaller. Some modchip OS's can do it for you. Just FYI.
Catch you later man _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
grxAndy Xbox-HQ Newbie
Joined: Sep 08, 2004 Posts: 4
Posted: Fri Sep 10, 2004 6:33 am Post subject:
Ok i thought it was the modhip not working because i moved it a little bit when trying to remove the flash protection jumper. So i moved it a little bit back and forth trying to get it back in position. Now something strange happend. I now get error code 16 all the time. No mather what i am doing. I also removed the modchip totally and booted up and i get error cod 16 there to. Now i dont know what to do, Is the xbox broken???
pls help me
best regs
//andy
grxAndy Xbox-HQ Newbie
Joined: Sep 08, 2004 Posts: 4
Posted: Fri Sep 10, 2004 9:04 am Post subject:
Yippi!!!
I tried and tried moving fixicating the pinheads fort the modchip and suddenly it all worked.. the cd booted up and now i have installed the newest bios.. thnx for all the support
best regs
//andy
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum