CORRAN Xbox-HQ Member Xbox Version: Xbox V1.0 Modded: Xecuter2
Joined: Jan 28, 2006 Posts: 68 Location: Torquay
Posted: Tue Mar 14, 2006 3:43 am Post subject: error 13 (SOLVED)
Hey again guys.
Okay, last night i decided that i would take the almighty step of putting a larger hard drive into my xbox. So, i got the AID 3.0 iso, updated it and burnt to DVD.
After that i took out my original 10gb Xbox HD and replaced it with new 80gb drive and put the AID disk into the DVD drive. The AID installer came up fine and i went into format drives. After about 10 minutes i got the sinking feeling that the machine had crashed - it stopped making noises and wasn't progressing on the install at all. I gave it a little more time, but finally thought, 'What the hell' and i rebooted to start the installer again....
What a fool! Now, every time i turn on the xbox it gives me error 13 and won't load from the AID disk. I know i made a mistake somewhere here - probably with partitions or something - or i wouldn't be in this mess, can anyone help?
Thanks guys. I suck!
Corran _________________ Version: Xbox V1.0
Mod Chip: Xecuter 2
BIOS: 4983.06
Dash:EvoX V+3935
HDD: 80gb Maxtor
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Tue Mar 14, 2006 3:52 am Post subject:
if the xbox is chipped just break out the xboxhdm and wipe the partitions on it and start over. _________________
CORRAN Xbox-HQ Member Xbox Version: Xbox V1.0 Modded: Xecuter2
Joined: Jan 28, 2006 Posts: 68 Location: Torquay
Posted: Tue Mar 14, 2006 4:09 am Post subject:
this is probably a stupid question, but how do i go about that? xboxhdm is for hotswapping right? _________________ Version: Xbox V1.0
Mod Chip: Xecuter 2
BIOS: 4983.06
Dash:EvoX V+3935
HDD: 80gb Maxtor
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Tue Mar 14, 2006 4:20 am Post subject:
its for making new harddrives or rebulding corrupted harddrive and yes hotswaping too, um xboxhdm can be found in the vipdownloads section or in xbins _________________
CORRAN Xbox-HQ Member Xbox Version: Xbox V1.0 Modded: Xecuter2
Joined: Jan 28, 2006 Posts: 68 Location: Torquay
Posted: Tue Mar 14, 2006 4:23 am Post subject:
thanks for ur help man and especially the speed of it...i was going to bed but now i'm ready to work this out. i'll shout you when i mess it up!
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Tue Mar 14, 2006 6:10 am Post subject:
alright then good luck _________________
CORRAN Xbox-HQ Member Xbox Version: Xbox V1.0 Modded: Xecuter2
Joined: Jan 28, 2006 Posts: 68 Location: Torquay
Posted: Tue Mar 14, 2006 6:11 am Post subject:
Hey once more
Okay, so i did the xboxhdm thing and managed to get my xbox running with the Xbox dash. Awesome.
I figured i would start the AID disk and see what happened, but while installing Evox, it crashed again. Nightmare.
Now, when i turn the Xbox on it gives me Unspecified error (21) unless there is a game in there, then it will just play it like normal. Unfortunately, the AID disk doesn't want to read so easily so when that disk is in the drive it just goes straight to the error 21.
Do you think i should try and burn another iso for AID 3.0 or just keep trying until it works??
Thanks again
Corran _________________ Version: Xbox V1.0
Mod Chip: Xecuter 2
BIOS: 4983.06
Dash:EvoX V+3935
HDD: 80gb Maxtor
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Tue Mar 14, 2006 6:14 am Post subject:
how did you burn AID 3, DVD R or CD R and what speed did you burn it at? _________________
CORRAN Xbox-HQ Member Xbox Version: Xbox V1.0 Modded: Xecuter2
Joined: Jan 28, 2006 Posts: 68 Location: Torquay
Posted: Tue Mar 14, 2006 6:18 am Post subject:
DVD R at two speed on DVD Decrypter, which i though would be slow enough...?
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Tue Mar 14, 2006 6:19 am Post subject:
then it could be the dvd drive thats doing that or the ms dash that your using or even the type of media your using to burn it to. _________________
CORRAN Xbox-HQ Member Xbox Version: Xbox V1.0 Modded: Xecuter2
Joined: Jan 28, 2006 Posts: 68 Location: Torquay
Posted: Tue Mar 14, 2006 6:22 am Post subject:
this is turning into a nightmare...all this fuss just to add a little more - well, a lot more - hard drive space...was it all worth it!
I'll keep investigating anyway and see what happens. Thanks for all your help, i love these forums.
Corran _________________ Version: Xbox V1.0
Mod Chip: Xecuter 2
BIOS: 4983.06
Dash:EvoX V+3935
HDD: 80gb Maxtor
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Tue Mar 14, 2006 6:24 am Post subject:
ok it just seems odd that it freezes. _________________
pirrup V.I.P. Lifetime Xbox Version: Xbox V1.0 Modded: Xecuter2
Joined: Feb 01, 2005 Posts: 1345 Location: belgium
Joined: Aug 10, 2005 Posts: 1 Location: USA California Watsonville
Posted: Tue Mar 14, 2006 9:42 am Post subject:
i know ..... by any chance is your aid 3 disc damage??? i mean like scratches and this n that???? YEP IT HAS TO BE THAT .... make a new one .... burn it finilize it and re try it ...
if u have a chip righ? make new aid 3 pop new hd and turn on chip and make it xbox readable w/ aid 3 ! good luck.....
xboxhdm is mostly for ppl that dont have chips .... so this is how the make the hds... but for u its easy cuz u have a chip! _________________ Xbox 360 Premium edition
2 wireless controllers
PGR 3
S E Blue Halo 2 Crystal Xbox
XBOX V1.4
Phillips DVD-ROM
UnleashX
200GB HD MAXTOR
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,169 | 
Guests: 824 | 
Members: 1 
Forums 
a new disk already damaged, think realistically
