Posted: Tue Nov 29, 2005 3:44 am Post subject: on the front board which light is the green light
on the front pcb which led is the main green one LED1 or LED2 need to know asap...
-SpiritSlayer
nknave Xbox-HQ Freak
Joined: Jul 13, 2005 Posts: 866 Location: Kansas City MO
Posted: Tue Nov 29, 2005 3:45 am Post subject: Re: on the front board which light is the green light
SpiritSlayer wrote:
on the front pcb which led is the main green one LED1 or LED2 need to know asap...
-SpiritSlayer
not sure, but it should be LED2, since it's second.
halouser Xbox-HQ Member
Joined: May 04, 2005 Posts: 97 Location: georgia
Posted: Tue Nov 29, 2005 6:29 pm Post subject:
both leds on the power eject pcb are green, orange, and red. they are tri colored. if you are looking straight at the board you will see the two leds on either side and the the power button on top of the eject button. you will see that the led has three leads. the middle lead will be the ground. now under the left led you are going to see a white circle that is flat on the bottum. the round portion of the circle is going to be your primary led color. its the same concept for the right led, only the cirlc is upside down (you will also need to positive leg to be soldered to the round portion of the circle). i know this probably got a little confusing, so if you need anymore help please reply.
on the rightmost portion of the board you can see where the power cord connects to the pcb. you want to switch pins 7 and 8 for the right led. you want to switch pins 5 and 6 for the left led. _________________ wetbox rusty pc
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum