Posted: Fri Oct 07, 2005 10:18 pm Post subject: Help modding Xbox Ver 1.0 with a spice chip
I have just bought a spice chip to fit to my version 1.0 xbox but i am having trouble fitting in. I have got my xbox stripped down but i cant see where the clear plasticpart of the chip is surpose to go? Thanks
dangermouse Moderator
Joined: Jun 24, 2005 Posts: 972 Location: Tucson
Posted: Fri Oct 07, 2005 11:13 pm Post subject:
All you need for a V1.0 board is the solderless adaptor. The template and sp board are for v1.6 mobo's. _________________ Xenium Ice 2.3.1 OS
200gb Seagate HDD
|HOTSWAP|Upgrade HDD|
DYS Xbox-HQ Newbie Xbox Version: v1.1 Modded: Xenium Ice OS v2.3.1
Joined: Oct 07, 2005 Posts: 5
Posted: Fri Oct 07, 2005 11:38 pm Post subject:
so i can just screw my chip onto the board and place all conectors in the ocrrt pins on the board?
impwiz V.I.P. Lifetime Xbox Version: all Modded: everything
Joined: Aug 30, 2005 Posts: 1070 Location: Detroit
Posted: Sat Oct 08, 2005 3:15 am Post subject:
you have to use the black (or maybe blue. depends on who sold it to you) adaptor supplied. It has one curved wire on it, the d0 wire. I assume you've seen installation instructions for 1.0-1.5 mobo's. The curved piece with the 5 pins is usless in your application. Sell it on ebay. _________________
DYS Xbox-HQ Newbie Xbox Version: all Modded: everything
The second one contains more detailed instructions for installing but adapter is a little diferent. Just check this post again before you power on.
The adapter on the pdf files is blue and yours is black. they are esentially the same but yours has 2 rows of aditional pins. Just remember to sit your chip starting to the rightmost pins. and the ones left with no conection are 3 pins. 2 next to each other and the very first one that is alone.
Search here for tutorials. if you are really sure you have a 1.0 then instalation is a bit simpler than the rest.
once you are done dont bother with all the dashboards there and go directly with Auto Installer Deluxe 2.11 final which will help installing dashboards, applications and emulators to current hd or if you plan to change it it will help you too with that.
if you are a VIP you will fint it in VIP download section, if you are not consider becoming one to gain access to a lot more stuff.
Hope this helps! good luck. _________________ Xbox V1.0
Xenium SP ICE w/ Xenium OS 2.3
Thompson Drive
250gb Hard Drive
UnleashX, XBMC
**Xbox 360**
DYS Xbox-HQ Newbie Xbox Version: Xbox 1.0 Modded: Xenium Sp ICE SOlderless
Joined: Oct 07, 2005 Posts: 5
Posted: Sat Oct 08, 2005 4:44 pm Post subject:
Thanks, i have a better idea of how it goes in. I have just triedit and all i get when i turn it on is a beep and a flashing orange light on the eject button??
dangermouse Moderator
Joined: Jun 24, 2005 Posts: 972 Location: Tucson
Posted: Sun Oct 09, 2005 5:35 am Post subject:
You'll need to install a bios onto the chip. Download the Ice Guide from TeamXodus. It will show you how to install the bios. _________________ Xenium Ice 2.3.1 OS
200gb Seagate HDD
|HOTSWAP|Upgrade HDD|
impwiz V.I.P. Lifetime Xbox Version: all Modded: everything
Joined: Aug 30, 2005 Posts: 1070 Location: Detroit
Posted: Mon Oct 10, 2005 6:13 am Post subject:
Are you mistaking the solderless adaptor for a chip?? Do you have a Square pcb board with xenium written on one side? I hope so... _________________
DYS Xbox-HQ Newbie Xbox Version: all Modded: everything
Joined: Oct 07, 2005 Posts: 5
Posted: Mon Oct 10, 2005 5:17 pm Post subject: re
OK. I have installed it all and the Chip is lighting up red but my xbox eject button is flashing green/red?
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 9,889 | 
Guests: 2458 | 
Members: 0 
Forums 
