Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Fri May 12, 2006 11:27 pm Post subject: Moddingbandit needs our help
He has a Xecuter 2.6ce that boots directly to the error screen. He has error 5 for unlocked HDD and 21 for M$ dash. I have searched for an hour and a half and still no answer. He only has 3 switches, flash protect, bank1 and bank 2.
How can we bypass the M$ dash and boot directly to the chip do that he can use AID. I've only done a few xecuter's so I'm no expert on them. The HDD that he is using was mine and was used with a xenium chip.
Please help him out, he's always here helping others.
I will keep on looking to see if I can find an answer for him. _________________
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Fri May 12, 2006 11:30 pm Post subject:
did he ever get that bios on the chip yet? _________________
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Fri May 12, 2006 11:32 pm Post subject:
nope, he cant boot the chip up. It goes directly to the error screen and nothing else. He doen't have a programmer, so i'm stuck. He told me you were helping him out. _________________
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Fri May 12, 2006 11:47 pm Post subject:
I was trying the best I could to help him. I wouldnt know how he got error 5 either, sounds like he swapped the harddrive. _________________
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Fri May 12, 2006 11:51 pm Post subject:
The harddrive he'snusing was mine. When I upgraded my hdd, I took that one out, but my Xenium chip did not lock it before I removed it. _________________
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Fri May 12, 2006 11:57 pm Post subject:
ahh ok that explains it, well he needs a programmer or some one to lend him one. Im sure some one in the HQ will. _________________
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Sat May 13, 2006 12:04 am Post subject:
So then all he needs is a programmer? I asked him if he had one and he said he didn't order it. _________________
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Sat May 13, 2006 12:10 am Post subject:
yeah all he needs is a programmer and just slip the bios on the chip and then he should be able to use the harddrive without any problems. _________________
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Sat May 13, 2006 12:12 am Post subject:
I just spoke to him via aim. It looks like a bad solder job. I'm going to look at the post we have with modders and see if there is anyone in his area. _________________
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Sat May 13, 2006 12:16 am Post subject:
Id like to see a pic of the solder job myself. _________________
enigma516 V.I.P. Lifetime
Joined: Feb 07, 2005 Posts: 2743 Location: Florida
Posted: Sat May 13, 2006 12:25 am Post subject:
He's on aim right now. You might want to contact him and see if he can get you a pic. I'm out now, gotta start closing the store. I'll be back on after 10pm when I get home. _________________
dangermouse Moderator
Joined: Jun 24, 2005 Posts: 972 Location: Tucson
Posted: Sat May 13, 2006 12:40 am Post subject:
hellblazer55 wrote:
yeah all he needs is a programmer
So does that go the same for the X3?
Is that why so many others are getting those errors also?
I was assuming that they had an OS you can boot to. _________________ Xenium Ice 2.3.1 OS
200gb Seagate HDD
|HOTSWAP|Upgrade HDD|
hellblazer55 V.I.P. Lifetime
Joined: Oct 03, 2005 Posts: 6381 Location: Canada
Posted: Sat May 13, 2006 12:48 am Post subject:
this one didnt have flashbios on the chip _________________
Moddingbandit V.I.P. Lifetime Xbox Version: v1.1 Modded: Xenium Ice OS v2.3.1
Joined: Jan 28, 2006 Posts: 850 Location: Georgia
Posted: Sat May 13, 2006 12:53 am Post subject: ok
Yea, I think it was just a bad solder. I am pretty sure. I appreciate Enigmah helping me out like that. And Hellblazer too, for our countless nights trying to solve it. It is a bad solder I guess. So, I guess I will be sending it to a friend to have it fixed. I am hoping maybe sjohn can help me out since he is so close. _________________ Moddingbandit
I do softmods and solderless chips only. Just Pm me for details.
[img]http://i65.photobucket.com/albums/h214/impwiz/modding-bandit-anime.gif[/img]
Xbox 1.6 B Xecuter 2.6 CE
Latnem V.I.P. Lifetime Xbox Version: 1.0 Modded: Xecuter 3
Joined: Dec 01, 2004 Posts: 34 Location: Alabama
Posted: Sat May 13, 2006 3:45 am Post subject:
Could you try putting the chip in another box to flash the bios then put the chip back into the box your trying to use?
kinda like a hotswap on the chips
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 9,253 | 
Guests: 1051 | 
Members: 1 
Forums 
