HQ NETWORK:   XBOX ONE |  XBOX 360 |  AIDELUXE HQ Network: 1,394 | Guests: 263 | Members: 0 

   Current Location: Forums Dodgy Version of GTA San Andreas The XBOX Xperience   |   Fan Mod 60mm   |   No Video Output   |   New Game - Fursan al-Aqsa - Knights of al-Aqsa Mosque   |   My mission to open xbox-hq on Xbox classic. (Need help)   |   Trying to Download The Xbox Music Mixer PC Tool   |   Winbond W49F020T   |   Evox MD5 and flashrom Hash codes   |   Xbox HDMI mod   |   XBOX flashing orange.   |   
  Home | Active Topics | CD/DVD Media | Downloads | Forums | Feedback | Games | HardDrives | Homebrew | My Profile | ModChips | Reviews | Search | SoftMods | Tutorials

Xbox Forums

Discuss all aspects of the original Xbox Console in our Interactive Xbox Forums..

Get Xbox Game Pass Ultimate
Xbox-Hq.Com :: View topic - Xecuter 3 install on 1.6b
Xbox-Hq.Com Forum Index -> Xecuter Modchip Discussions (Xecuter1, Xecuter2, Xecuter3)
Post new topic Reply to topic    
 Xecuter 3 install on 1.6b View previous topic :: View next topic  
V.I.P. Lifetime

Xbox Version: 1.0
Modded: Xecuter 3

Joined: Dec 01, 2004
Posts: 34
Location: Alabama

Post Posted: Fri May 12, 2006 7:24 am   
Post subject: Xecuter 3 install on 1.6b
Reply with quote
Ok first off this may sound really stupid, does to me anyway, but I'm doing an Install for my sister on a 1.6b motherboard (my first 1.6) and I kinda fucked up when I was doing the LPC rebuild (cold head didnt want to work quite right) so I decided I would take off the LPC rebuild board and in the process I pulled up a trace Line. The trace that I pulled up is the LAD2. I think that I pulled it off upto the 2nd solder point (its between the header pins between the 3rd and 4th from the bottom, or top not sure which it would be). But to make a really long story just a little shorter I took the LCP board off because I'm a lot more comfertable doing a wire install rather than working with the board so I was wondering how I would go about reparing the trace. Would I solder a wire from where I pulled it up to where It was broken, and then do a wire install as I normally would?

just on a side note, I dont like 1.6s

View user's profile Send private message Send e-mail AIM Address
V.I.P. Lifetime

Xbox Version: 2x V1.6
Modded: X3CE |.3108 + .3294 |

Joined: Mar 12, 2005
Posts: 1887
Location: Orlando/West Palm Beach, FL USA

Post Posted: Fri May 12, 2006 12:48 pm   
Post subject:
Reply with quote
Yea, cold heat is sort of like an arc welder, it could possilby send a bad current through the board so you mihg tnot want to keep using it.

However, as for the trace, you can repair that with a Circuit Repair Pen from Radio Shack, its about 12 bucks and takes 24 hours to cure but it gets the job done.

As far as where to solder it, i would use the other end of the trace the other 'o' that is on the board. The pen can only restore the electric current to the trace, but you can't solder to it. You can also use a jumper method, wire from each side of the broken trace.

I had a pulled trace by accident and fixed it. I bought a DIY PCB (Printed Circuit Board) and some jumpers and got a friends xbox working for about a year now without problems.

XBOX v1.6

View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
  Post new topic  
  Reply to topic  
 All times are GMT | Page 1 of 1
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum

Get Xbox Game Pass Ultimate