Posted: Mon Aug 30, 2004 12:32 pm Post subject: Problem turning off Xecuter 2.3b Lite
I installed an Xecuter 2.3b Lite and a 120GB Hard drive. When I turn the Xecuter off, the XBox will not start up. I get an message that it needs servicing. I think it has something to do with locking the drive and the drive/motherboard serial number. How do I fix it so that I can turn the mod off and use the XBox normally?
CHEEZ_PUF Xbox-HQ Experienced Xbox Version: v1.1 Modded:
Joined: Jun 18, 2004 Posts: 151 Location: Morgantown, WV
Posted: Mon Aug 30, 2004 1:59 pm Post subject:
Yes, you need to lock the HD. Pop in an auto-installer (like the new Xbox-hq installer), which has the feature on it. Hopefully it will work with that. If it doesn't the HD can still be locked but the process is a little more difficult. _________________ XBOX v1.1 - Philips DVD
Xecuter 2.3 Lite+ (that's a tiny d0!)
steve69 Xbox-HQ Enthusiast Xbox Version: v1.1 Modded:
Joined: Aug 03, 2004 Posts: 30
Posted: Mon Aug 30, 2004 2:03 pm Post subject:
I tried locking it with config magic, but it did not seem to make a difference. Does this match the password between the motherboard and the hard drive?
CHEEZ_PUF Xbox-HQ Experienced Xbox Version: v1.1 Modded:
Joined: Jun 18, 2004 Posts: 151 Location: Morgantown, WV
Posted: Mon Aug 30, 2004 4:45 pm Post subject:
I'm not sure how it works. Are you using the original HD or is this an upgrade? (an upgrade is my guess).
Did you use an auto-installer to rebuild a retail HD? The box obviously wont boot to the xbox dash if it isn't there.
I am at a loss if you have everything, but it still wont work. Your HD might not be lockable.
Hang in there. Someone might know how to fix it. _________________ XBOX v1.1 - Philips DVD
Xecuter 2.3 Lite+ (that's a tiny d0!)
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Mon Aug 30, 2004 11:58 pm Post subject:
Hi Steve69,
Do us a favour and add your signature.. We need to know you full setup without having to ask you all the time.
steve69 Xbox-HQ Enthusiast Xbox Version: v1.1 Modded:
Joined: Aug 03, 2004 Posts: 30
Posted: Tue Aug 31, 2004 12:09 am Post subject:
When I turn the xbox on without the mod chip enabled, I get this message: "Your XBox requires service. Please call XBox customer support", in many languages. Note that it seems to be working fine (with a couple small problems) with the mod chip enabled. _________________ XBOX v1.0
Thompson DVD
Xecutor 2.3b Lite
120GB Western Digital WD1200AB HDD
EvoX 3935 Dashboard
TheModGod Xbox-Hq Legendary Xbox Version: v1.1 Modded:
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Tue Aug 31, 2004 4:41 am Post subject:
What error number are you seeing in the upper corner?? My bet is error 13 or 21.
I would venture to say you have a MS Dash issue.
Try to reinstall your MS Dash via the autoinstaller. _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
steve69 Xbox-HQ Enthusiast Xbox Version: v1.1 Modded:
Joined: Aug 03, 2004 Posts: 30
Posted: Wed Sep 01, 2004 4:41 am Post subject:
I installed the MS Dashboard from the autoinstall disk. Now, when I turn it on with the mod chip disabled, I get the xbox logo, then green screen that fades from light around the edges to dark in the middle with a spiderweb over the whole thing. Then it just sits there while the greens change slightly. _________________ XBOX v1.0
Thompson DVD
Xecutor 2.3b Lite
120GB Western Digital WD1200AB HDD
EvoX 3935 Dashboard
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 7,453 | 
Guests: 718 | 
Members: 3 
Forums 
