Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Tue Aug 02, 2005 8:11 am Post subject: Auto-Installer Deluxe v2.11 FINAL Help
Please post any questions you have here.
Remember always to try and do some reading of the both the manual and forum posts to answer any of the smaller questions...
Last edited by DJB on Wed Feb 01, 2006 11:23 am; edited 1 time in total
yoshie1 V.I.P. Lifetime Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Dec 26, 2004 Posts: 958 Location: Akron, Ohio
Posted: Sat Aug 06, 2005 5:02 pm Post subject:
Hi....I previously used my aid 1.01 disc and it didn't work right while trying to install on my friends v1.4....It would install evox 3935 half way and get an error so I decided to download the new 2.11 yesterday to see if i could get the drive to stop getting errors. I burnt the disc and attempted to reformat and preprare the drive using aid2.11....That went fine, reinstalled the msdash, and then attempted to install 3935....However it doesn't move past 0% and errors on the evox.ini file then when I reboot I get error 21....Was I supposed to change something in the 2.11 iso or am I just doing something wrong. I had M8+ in it and I am going to go try to load the M8+ 137+ bios that came in the 2.11 folders....Hopefully I am just being a retard and over looked something but I read through some of the posts and didn't see people were having problems with 2.11....any suggestions on how to fix this would be greatly appreciated.....Thanks. _________________ Xbox V1.6
Xenium ICE White
EvoX M8+ 16 137+
EvoX 3935
Maxtor 300GB
yoshie1 V.I.P. Lifetime Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Dec 26, 2004 Posts: 958 Location: Akron, Ohio
Posted: Sat Aug 06, 2005 6:59 pm Post subject:
I somehow got the dash to work...or at least have some functionability becasuse it still didn't get past 0% when installing but I got the dash to work and copied a game using complex tools to double check to see if it would work....however, when i tried to go to xbmc I got a fatal error saying it couldnt find its backround or something like that and that a network cable was unplugged....I tried to install 3935 on my other 1.0 box I just got and the dash got stuck extracting at evox.ini again.....Do you have any clue why this is happening....could the download have been corrupt yesterday? Thanks. _________________ Xbox V1.6
Xenium ICE White
EvoX M8+ 16 137+
EvoX 3935
Maxtor 300GB
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sat Aug 06, 2005 10:25 pm Post subject:
Ok with XBMC, delete the old gamesave that a previous intall of XBMC could have left.
With the other problems, I'd say this might be caused by a bad burn onto the CD / DVD, as the files are not corrupted when I released it.
yoshie1 V.I.P. Lifetime Xbox Version: Xbox V1.6 Modded: Xenium ICE White
Joined: Dec 26, 2004 Posts: 958 Location: Akron, Ohio
Posted: Mon Aug 08, 2005 2:17 am Post subject:
Thank you for the reply DJB. I got everything working right now. I tried burning aid to cdrw again but kept getting the same error. I did not think it was my media because it was from the same batch of cds I used on my first xbox with aid1.0....however, I burnt it to a dvd and it worked flawlessly....instead of looking for the xbmc stuff I just reformated the hdd and went from there....I do have to admit man, that is one hell of program. I was so impressed with all of the added features from 1.0...Thanks again, heck I am so impressed I am going to go order a tshirt from forahobby now and you can bet when my year membership expires I'll be getting a lifetime one. Thanks again though! _________________ Xbox V1.6
Xenium ICE White
EvoX M8+ 16 137+
EvoX 3935
Maxtor 300GB
Memphissheik Xbox-HQ Enthusiast
Joined: Aug 07, 2005 Posts: 22
Posted: Tue Aug 09, 2005 1:03 am Post subject:
Hey guys...
this would actually be my first post on the forum...since I've been lurking and trying to soak up as much information on how to do this and get it right.
Truth is, I didn't grow a pair bold enough to get this done until I stumbled across this site.
At any rate, I've gotten the softmod installed, burned the ISO to CD-RW
and the disk boots up..fine..
but in the instructions that I printed..
it says that I should then go to the softmod section and install NK Patcher + MS Dash..
only problem is..I don't have an official softmod section..
is there something that I'm missing?
I see the other things that are selectable in the dash, just not that..
any help would be greatly appreciated.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Tue Aug 09, 2005 6:19 am Post subject:
Memphissheik wrote:
Hey guys...
this would actually be my first post on the forum...since I've been lurking and trying to soak up as much information on how to do this and get it right.
Truth is, I didn't grow a pair bold enough to get this done until I stumbled across this site.
At any rate, I've gotten the softmod installed, burned the ISO to CD-RW
and the disk boots up..fine..
but in the instructions that I printed..
it says that I should then go to the softmod section and install NK Patcher + MS Dash..
only problem is..I don't have an official softmod section..
is there something that I'm missing?
I see the other things that are selectable in the dash, just not that..
any help would be greatly appreciated.
OK Firstly grab AID 2.11 Final which has all the current problems fixed with it. This should have the "Softmod Section" in the main menu (just like AID 2.0 does).
Memphissheik Xbox-HQ Enthusiast
Joined: Aug 07, 2005 Posts: 22
Posted: Tue Aug 09, 2005 7:19 am Post subject:
thanks for the fast reply.....DJB..
but that's the one I have right now...
I was trying to follow the directions that I got from the site....
everything seemed fine up until the "look for the softmod section"
I just wish I could take a shot of the dashboard so I could show you....what it looks like
again, any help would be appreciated
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Tue Aug 09, 2005 7:28 am Post subject:
The softmod section I'm talking about is on the AID CD-RW/DVD itself. You have to boot it in your xbox to access it.
Memphissheik Xbox-HQ Enthusiast
Joined: Aug 07, 2005 Posts: 22
Posted: Tue Aug 09, 2005 7:37 am Post subject:
that's what I'm talkin' about as well
how do I get to it
I was thinking that it would be in the initial selectable....toggles once you boot the disk
but it's not
I just restored..to my original ms dash..and I'm gonna try it again....
Memphissheik Xbox-HQ Enthusiast
Joined: Aug 07, 2005 Posts: 22
Posted: Tue Aug 09, 2005 7:45 am Post subject:
ok..once the disk..boots..up..
I have
Launch DVD
Games
Applications
Emulators
System
File Explorer
MS Dashboard
Reboot
Shutdown
I'm looking on the disc....
and I don't see the install NK patcher + MS Dash...files..
I'm just feeling like there's something that I missed...
Memphissheik Xbox-HQ Enthusiast
Joined: Aug 07, 2005 Posts: 22
Posted: Tue Aug 09, 2005 7:52 am Post subject:
also..reading through your text..file....I'm wondering...
am I supposed to be hearing music?
maybe this disk isn't working
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Tue Aug 09, 2005 9:09 am Post subject:
Click on the Launch DVD with AID in the disc tray, that should start it.
Memphissheik Xbox-HQ Enthusiast
Joined: Aug 07, 2005 Posts: 22
Posted: Tue Aug 09, 2005 9:24 am Post subject:
one sec..I think I may have burned it incorrectly..gonna give it one last try ..rather quickly..will be back to let you know
Memphissheik Xbox-HQ Enthusiast
Joined: Aug 07, 2005 Posts: 22
Posted: Tue Aug 09, 2005 10:07 am Post subject:
wow..ok...reading is fundamental..
everything is working now..
I didn't burn the disc properly..
I basically went through your excellent .pdf and downloaded that temp version of nero..because the one I currently had on my system kept fruitin' it up...
burned it at 4x speed..and bam....I'm in..
so far..so good..
thanks for the help ..I know I'm a little slow, but I just got off work..
I can't tell you how much better I feel now..that I actually got this accomplished...
I guess the next step will be a larger HD..
at any rate...thanks....now...I just gotta get into it by ftp..
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 7,694 | 
Guests: 765 | 
Members: 0 
Forums 
