Joined: Jun 24, 2004 Posts: 658 Location: Melbourne, FL
Posted: Wed May 11, 2005 3:34 am Post subject: Better program than Xbox Saves out there?
Well I used to use this program without any type of trouble...now it just wont do anything for me.
Is there any other program out there that will let me transfer saves from the PC to my Xbox?
Thanks in advance! _________________ SE Halo Xbox v1.4 :
Xenium Ice Modchip
Xecuter2 Bios 4983.67
EvoX Dashboard 3935
Philips DVD Drive
250GB Western Digital HDD
Logitech Cordless Precision Controller
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Wed May 11, 2005 4:04 am Post subject:
turn of f your firewalls..
If you can ftp to your xbox fine then re-install XBOX SAVES MANAGER.
Ive never really had any probs with it.. Not a bad app at all.
Joined: Jun 24, 2004 Posts: 658 Location: Melbourne, FL
Posted: Wed May 11, 2005 4:09 am Post subject:
well its not the transfering thats biggin it...it wont even see my downloaded saves...which has me quite irked lol _________________ SE Halo Xbox v1.4 :
Xenium Ice Modchip
Xecuter2 Bios 4983.67
EvoX Dashboard 3935
Philips DVD Drive
250GB Western Digital HDD
Logitech Cordless Precision Controller
Andrewfrink V.I.P. Lifetime
Joined: Jul 25, 2004 Posts: 389 Location: Tucson, AZ
Posted: Wed May 11, 2005 4:52 am Post subject:
I believe theres a file in the programs directory to put saves....I think they must be in a .zip file too or it wont read em hope that helps I havent had any trouble with it _________________ Xbox v1.0
Xenium ICE
120gb HD
Evolution X v3935
Evox m8 BIOS
BAD DEAL: LYCZ2004
Slamscaper Xbox-HQ Freak
Joined: Jun 24, 2004 Posts: 658 Location: Melbourne, FL
Posted: Wed May 11, 2005 5:14 am Post subject:
i reinstalled it with zip instead of winrar this time around and it went fine! Thanks fellas! _________________ SE Halo Xbox v1.4 :
Xenium Ice Modchip
Xecuter2 Bios 4983.67
EvoX Dashboard 3935
Philips DVD Drive
250GB Western Digital HDD
Logitech Cordless Precision Controller
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Wed May 11, 2005 8:11 pm Post subject:
sweet...glad you got it rolling again! _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
Slamscaper Xbox-HQ Freak
Joined: Jun 24, 2004 Posts: 658 Location: Melbourne, FL
Posted: Wed May 11, 2005 8:12 pm Post subject:
thanks MG! _________________ SE Halo Xbox v1.4 :
Xenium Ice Modchip
Xecuter2 Bios 4983.67
EvoX Dashboard 3935
Philips DVD Drive
250GB Western Digital HDD
Logitech Cordless Precision Controller
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Wed May 11, 2005 8:22 pm Post subject:
No problem brother! What have you been up to lately!! I have been wrestling with a friggin 1.6b Xbox for FOUR frigging hours. Piece of shit Hynix RAM.
I feel like when I did your machine...remember. I wrestled with error 21 for like a day before I figured out that the MS Dash in the installer I was using was not compatible with your 1.4 Focus machine...lol.
I started off with this one today not realizing it had the Hynix RAM. I installed a SmartXX LT OPX chip and flashed it with M8 bios. I popped in the new 200GB Maxtor HD only to get the loud clicking noise of death! Turns out, bought a bum HD...brand new too. So, I put another brand new Drive in and no clicking noise. Then, I tried to launch the AID and it actually launched but kept locking up on me while installing dashboards.
Then I decided to check the RAM..sure enough...my very first 1.6b..so I consider myself lucky. I downloaded Yoshi's M8plus beta 4 and it actually launched. Had a blue X, all looked cool.
I did a reboot and tried launching the installer but only getting a black screen. Really confused me as to why it worked once and now not. LT OPX chips on 1.6 boards are notorious for needing retouched after first install. Sometimes after the board heats up the chip actually moves even though it's quick soldered. All points were touched up and looked great actually, but same result. So, decided to download a non yoshi M8 bios.
Joy...but with one issue. It would only recognize 137GB of the 200GB HD, so had to download EvTool 1.0.9 so I could tweak the bios.
FINALLY I am now installing all of the apps and emu's... four hours, three bios' and three bios disks later!!
What a frigging day..
later man _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
Slamscaper Xbox-HQ Freak
Joined: Jun 24, 2004 Posts: 658 Location: Melbourne, FL
Posted: Wed May 11, 2005 8:28 pm Post subject:
they are getting tougher on your guys then eh? sounds like joy! LOL
my xbox has been running like a true champ! i only have trouble pulling MP3's from my PC to the Xbox...weird i guess lol
speaking of maxtor...is it true they come without a backing? where you can just see the board and all? _________________ SE Halo Xbox v1.4 :
Xenium Ice Modchip
Xecuter2 Bios 4983.67
EvoX Dashboard 3935
Philips DVD Drive
250GB Western Digital HDD
Logitech Cordless Precision Controller
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Wed May 11, 2005 8:36 pm Post subject:
A lot of HDs are like that. You can see the board on the bottom side.. but yes, the maxtors come like that.
With your MP3 issue.... check the length of the filenames. If it's a long name and there are spaces, change it to something short and see if it pulls it better.
Just a thought... _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum