Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Sun Jan 23, 2005 4:46 am Post subject: Jewel LED Install
Hey Everyone (Especially ModGod)
I recently installed a Jewel LED kit provided to my by ModGod. I got everything I needed and went to town. I bought some stuff that I thought would work better than Paint Thinner (cause it said it did) but it didn't do jack crap cause I looked at the label a little bit closer and noticed that it's for removing paint off brushes, etc. So I still have to get my jewel clear, but other than that, everything is installed and working great.
My only beef is that the front of my case won't go down evenly and match up where it's supposed to be. Did I put it in wrong or is it just normally going to do that? It's not really that big of a deal, just wondering if there was something that I could do to make it go down better. I checked all the cables and everything and it should be going down smooth. Thanks for all the help, it looks pretty sweet and I can't wait to get the jewel back on there! _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sun Jan 23, 2005 5:49 am Post subject:
If the front of the case isn't going down, here is what I would try doing.
The little clip that you slide the IDE cable under, see if that is hitting the ring and causing the machine not to close the whole way.
If it is, you can just snip it off as I dont think your IDE cable is going to move anywhere it shouldn't.....lol. I never understood that clip thing anyway... HA.
Let me know if you can't get that jewel clear. I was cleaning out my desk and I found a flat clear replacement jewel that I could send you.
It will cost you a whopping $0.00
I have no need for it really, so if you need it shoot me your address again and I'll send it Monday. I think I know where I put it
Later bro _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sun Jan 23, 2005 5:56 am Post subject:
Hey, I found where I put it. I forgot, I also found a piano black Halo 2 jewel that I don't need.
It has a few scratches on it. I remember I rubbed the hot glue gun up against it and that's what did it, so if you ever use these ....don't do like I did:)
The Halo2 insignia is clear though and allows the light to flow through, so it gives a prett neat look.
Let me know which one you want, I'll send it to you.
later man
themodgod.com
jewels.jpg
Description:
Filesize:
38.13 KB
Viewed:
702 Time(s)
_________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
T-Rizzle Xbox-HQ Freak
Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Sun Jan 23, 2005 6:35 am Post subject:
ModGod,
Wow, you never cease to amaze me! It would be SO awesome if you could send me that Halo 2 jewel. Halo 2 is my game and that's all I ever usually play so it would be so awesome to show off. I really don't care that it has a few scratches in it, no biggie.
I'll also double check that IDE clip and see if that is causing a problem. Thank you so very much for all your awesome help in all of this. I'm so glad that I signed up for this site, especially to be a VIP member, it's all WELL WORTH IT! Thanks again.
I'll PM you my address again so that way you can get it sent out! Thanks! _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sun Jan 23, 2005 7:58 am Post subject:
Got our PM, jewel packed up and ready to roll.
later man _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
T-Rizzle Xbox-HQ Freak
Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Sun Jan 23, 2005 4:32 pm Post subject:
ModGod,
Awesome, can't wait to get it. Is that Halo 2 insignia clear or semi-clear? Enough where it will lit up decently? I'm sure that it is just wanted to double check!! Thanks again man! _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sun Jan 23, 2005 5:06 pm Post subject:
It allows plenty to shine through..it has a sandblasted look to the clear section...but if you look at the pic below, this is the exact same jewel but only in the Xbox Lighting design.
jewelremove05.jpg
Description:
Filesize:
20.53 KB
Viewed:
686 Time(s)
_________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sun Jan 23, 2005 5:07 pm Post subject:
With that being said, and shown.
If anyone wants a red LED ring like I got for T-Rizzle let me know.
I have a red one laying here to get rid of. I also have another black jewel I found that has Xbox written on it and flames coming off of it. Would be great for the red color.
later all _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
T-Rizzle Xbox-HQ Freak
Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Sun Jan 23, 2005 5:34 pm Post subject:
Awesome, just wanted to make sure. Now I'm even more excited to get it and put it on cause one of my friend's is a DIE HARD Halo fan, he's read all the books, etc so it's going to be really nice to rub this in his face! HAHAHA! Thanks again!
Also for anyone thinking about the Red Jewel Ring that he still has available, I would HIGHLY recommend it, they're great quality and he'll help you out every step of the way! _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
funkydopeloven Xbox-Hq Genius
Joined: Nov 30, 2004 Posts: 1942
Posted: Mon Jan 24, 2005 2:12 am Post subject:
hey ModGod, if that led ring and jewel is still available hit me up with a price, i may be interested
T-Rizzle Xbox-HQ Freak
Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Tue Jan 25, 2005 5:01 am Post subject:
The Jewel LED ring that I got from ModGod (green) cost 15 bucks and that's with shipping so not too shabby of a price, especially the quality of the ring and mirror below it. I'd definately get it, even if you're unsure, cause it does look damn cool. I just can't wait to get the Halo 2 Jewel from him and it'll look pimp! _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
funkydopeloven Xbox-Hq Genius
Joined: Nov 30, 2004 Posts: 1942
Posted: Tue Jan 25, 2005 5:31 am Post subject:
i am going the "build my own" route
T-Rizzle Xbox-HQ Freak
Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Tue Jan 25, 2005 4:17 pm Post subject:
That will probably be my next project because I recently picked up an unmodded 1.6b xbox and I'm going to use it for testing stuff out and doing various case mods to it. I'll post some photos once I start diving into it.
Since my major is Graphic Design, I'll probably end up trying to paint it and do various artworks to it so hopefully it'll look cool and I could maybe use it for one of my projects, that'd be nice, a project that I'd actually work on! haha.
Later all.... _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
funkydopeloven Xbox-Hq Genius
Joined: Nov 30, 2004 Posts: 1942
Posted: Tue Jan 25, 2005 11:46 pm Post subject:
someone needs to paint a Van Gogh or some master piece onto their xbox
p4dge Xbox-HQ User
Joined: Jan 25, 2005 Posts: 13 Location: the uk
Posted: Tue Jan 25, 2005 11:55 pm Post subject:
How much are your jewls? i was thinking of getting the one that says MOD INSIDE like the pentium nside badge
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum