Posted: Thu Jan 13, 2005 5:13 am Post subject: xecuter 3 problem
I just finished installing an xecuter 3 and everything was going just peachy and then wammo!
Periodically when I have the system running the screen goes blank and the bottom is kind of squiggly then it lightens up to a light grey and sits there and doesn't do anything (won't respond to anything but a hard reset)
system info
===========
v1.0
xecuter 3
X3_1957 bios
this problem ocurrs no matter what i'm doing (flash bios/auto installer/m$ dashboard)
any help would be greatly appreciated
I just realized what it reminds me of
it reminds me of what happends when you run a dvd player through a VCR it gets all static and then fades, repeat
don't know if that will help but i figured I would add it _________________ :_-=XBOX v1.0=-_:
Xecuter 3 (Pin Header Install)
X3 2913 BIOS
250GB Maxtor HDD (Comp USA Rules!)
EvoX 3935 Dashboard
Skin - Ghost In The Box (Blue)
GTGene Xbox-HQ Member
Xbox Version: Xbox V1.0 Modded: Xecuter3
Joined: Nov 11, 2004 Posts: 58 Location: Beach house on the moon
Posted: Thu Jan 13, 2005 12:34 pm Post subject:
For one you should be using the X3 1959 bios.. not the 1957 as there were MANY problems with that. You also don't say whether this is a pin header install or a solderless install. But the first thing I would do would be put the updated bios on it, run it and see if that fixes the problem. I can say of all the X3 installs I have done I have had NO problems at all using the X3 1959 bios..
Good Luck _________________ GTGene
V1.0 Xbox
Xecuter 3.0 mod chip
1959 bios and 2913(separate banks)
Evox Dash
XBMC
120gb Maxtor HDD
Logitech Wireless Controller
50" Sony LCD HDTV
NoseDive911 V.I.P. Lifetime
Joined: Sep 30, 2004 Posts: 76 Location: Michigan
Posted: Thu Jan 13, 2005 3:26 pm Post subject:
It is a pin header install
I'll try and update the bios and see if that helps
thanks
I just flashed to 1959 but I get the same thing
I have my box booted with the chip disabled to see if that makes a difference
nope still does the same thing , something else I notices when I'm trying to ftp into it the status of the netowork setting keeps switching from ip address and 100/full duplex to NO LINK
again i don't know how helpful that will be
thanks again _________________ :_-=XBOX v1.0=-_:
Xecuter 3 (Pin Header Install)
X3 2913 BIOS
250GB Maxtor HDD (Comp USA Rules!)
EvoX 3935 Dashboard
Skin - Ghost In The Box (Blue)
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum