Posted: Fri Nov 20, 2020 3:31 pm Post subject: Original Xbox HELP NEEDED
So I have an original Xbox and the first thing I did was give a good clean and then changed 3 caps that were leaked. it was not too bad and then I turned on the Xbox and everything was working.
Now I had look online and some of my games don't work so I did the laser volage and got down to 456.
Whenever I try to load a game it goes to error 21 and doing some research it was something do with dah bord but at the same time power supply started to smell.
Now as for the power supply did see this site here
http://store.richspsxparts.com/newxbposu.html
but I do not know if I have 1.0 - 1.5 Xbox or 1.6 as stated on their website.
This website is the only place I could find for a brand new one.
As for the hard drive I want to use a cheap "M.2 NGFF SATA SSD to 2.5 IDE 44pin Converter Adapter with Case Black / White Color SATAIII Connector SDD Converter Card Adapter" it has IDE 44pin so was wondering if any ones if this will work as i was going to buy this but have no idea if this work?
NEED HELP!
IMG_20201119_123406_8.jpg
Description:
Filesize:
3.03 MB
Viewed:
517 Time(s)
IMG_20201119_151430_5.jpg
Description:
Filesize:
193.93 KB
Viewed:
541 Time(s)
Xbmcmodsforxbox Moderator
Joined: Aug 13, 2018 Posts: 605 Location: United States
Joined: Feb 06, 2007 Posts: 2470 Location: Minnesota, USA
Posted: Sun Nov 22, 2020 3:50 pm Post subject:
Well upgrading hard drive you need to make sure your xbox is modded you have a 1.4 xbox so psu 1.2-1.4 will work and i would look up tsop flash (winbond)(thats your chipset) and follow the guide for 1.2-1.4 on the tube. Then you will be able to upgrade your drive. Also you dont ever want to go down below 500 on a pot tweak it will ruin the laser fast. The dashboard error could be a couple things best to mod then install new hard drive and dash but the psu i would take it out look at the bottom side around where you plug in at with the cord there is 2 spots that sometimes the solder breaks off fixing this with some more solder might fix your issue as i have had a psu make noise too and did that fix and it fixed the problem might fix your 21 error to because then no loss of power or anything you know great things to try. _________________ The one the only Scarface!!
syfer1987 Xbox-HQ User Xbox Version: V1.4 Modded: Xecuter 3 2tb xerc 2xe
Joined: Nov 20, 2020 Posts: 15
Posted: Mon Nov 23, 2020 1:04 pm Post subject:
@Xbmcmodsforxbox I will send my private pm
syfer1987 Xbox-HQ User Xbox Version: V1.4 Modded: Xecuter 3 2tb xerc 2xe
Joined: Nov 20, 2020 Posts: 15
Posted: Mon Nov 23, 2020 1:21 pm Post subject:
@ SCARFACE I think my power supply is dieing as its giving out strong odor so i will just buy a new one form Xbmcmodsforxbox.
I show this video
To soft mode my Xbox ill does that once I get a good power supply.
I might have to buy a new DVD drive as I want to play my original games.
May I ask were do i buy dvd drive from?
syfer1987 Xbox-HQ User Xbox Version: V1.4 Modded: Xecuter 3 2tb xerc 2xe
Joined: Nov 20, 2020 Posts: 15
Posted: Mon Nov 23, 2020 1:32 pm Post subject:
Hi for got to say my drive is philips VAD6011/21
s-A86KM S6KM
syfer1987 Xbox-HQ User Xbox Version: V1.4 Modded: Xecuter 3 2tb xerc 2xe
Joined: Nov 20, 2020 Posts: 15
Posted: Mon Nov 23, 2020 8:52 pm Post subject:
Hi I just ordered a very unused dvd drive so thats sorted also here is my mothermord
do i need to remove the battery capaistor?
IMG-20201123-154055-5.jpg
Description:
Filesize:
244.81 KB
Viewed:
509 Time(s)
IMG-20201123-154108-1.jpg
Description:
Filesize:
278.01 KB
Viewed:
473 Time(s)
IMG-20201123-154117-5.jpg
Description:
Filesize:
337.76 KB
Viewed:
472 Time(s)
IMG-20201123-154125-3.jpg
Description:
Filesize:
284.81 KB
Viewed:
462 Time(s)
IMG-20201123-154141-3.jpg
Description:
Filesize:
232.48 KB
Viewed:
483 Time(s)
IMG-20201123-154147-9.jpg
Description:
Filesize:
360.28 KB
Viewed:
501 Time(s)
SCARFACE Administrator
Joined: Feb 06, 2007 Posts: 2470 Location: Minnesota, USA
Posted: Mon Nov 23, 2020 10:40 pm Post subject:
here is a pic of the clock cap that needs to be removed
picturexbox-hq.jpg
Description:
Filesize:
1.66 MB
Viewed:
443 Time(s)
_________________ The one the only Scarface!!
syfer1987 Xbox-HQ User Xbox Version: V1.4 Modded: Xecuter 3 2tb xerc 2xe
Joined: Nov 20, 2020 Posts: 15
Posted: Tue Nov 24, 2020 9:21 pm Post subject:
What happens if I don't remove the capacitor? How do even remove this capacitor as I don't have anything that takes this of?
Also was wondering do you have any power supply for this xbox?
SCARFACE Administrator
Joined: Feb 06, 2007 Posts: 2470 Location: Minnesota, USA
Posted: Tue Nov 24, 2020 9:26 pm Post subject:
Wiggling it back and forth tell it pops off works or desoldering the 2 points and for the psu i will have to look because i might be out of the 1.2-1.4 psu that is needed _________________ The one the only Scarface!!
syfer1987 Xbox-HQ User Xbox Version: V1.4 Modded: Xecuter 3 2tb xerc 2xe
Joined: Nov 20, 2020 Posts: 15
Posted: Wed Nov 25, 2020 7:05 pm Post subject:
@ SCARFACE
Ok, thank you if you do not have the power supply then it's ok just let me know when you get one and then we will take it from there. I will wait for a message.
Dkoots Moderator
Joined: Oct 13, 2007 Posts: 1015 Location: VA
Posted: Thu Nov 26, 2020 3:53 am Post subject:
syfer1987 wrote:
What happens if I don't remove the capacitor? How do even remove this capacitor as I don't have anything that takes this of?
Also was wondering do you have any power supply for this xbox?
Cleanest way to remove the clock cap is to hold it in your off hand and heat up the two solder points on the opposite side of the board as you gently pull the clock cap. Do this one at a time (back and forth) and you will feel it start to pull. Go back and forth until you’ve pulled it out completely. Once you are done, clean under where the cap was with some isopropyl alcohol or lemon juice if it had already leaked badly. Or as Scar mentioned you can just wiggle until it breaks off, but you’ll be left with two stubs sticking out making it slightly harder to clean the area and it could take a while depending how close the cap was soldered on to begin with. Sometimes they’re are very close and hard to wiggle. _________________
kaos_engr V.I.P. Lifetime
Joined: Jun 04, 2012 Posts: 184
Posted: Mon Nov 30, 2020 7:57 pm Post subject:
Your Xbox is either a 1.2/1.3. No easy way to tell which.
Identifying features:
20-pin ATX-style power supply connector (1.2/1.3/1.4/1.6/1.6(b))
Conexant Video Encoder (1.0/1.1/1.2/1.3)
Crossover of versions for this console
1.2-1.3
kaos_engr V.I.P. Lifetime
Joined: Jun 04, 2012 Posts: 184
Posted: Mon Nov 30, 2020 8:02 pm Post subject:
There are three different styles of Xbox Power Supply Units (PSUs):
v1.0-v1.1 12x1 pin AT-style connector
v1.2-1.4 10x2 pin ATX-style connector with 3.3 Vdc standby power out
v1.6/1.6(b) 10x2 pin ATX-style connector with 5 Vdc standby power out
There are several different brands/models of PSUs across these three different styles.
You need to make sure the style you purchases matches the style required by Xbox version. There are also 220VAC and 120VAC models depending upon your countries power grid voltage level.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum