Posted: Thu Oct 28, 2004 6:43 pm Post subject: cannot ftp
hi all..i have just used ai to make my bigger hdd work correctly..only problem i have is that i cannot connect using my crossover cable and flash fxp to my laptop.
i get a message saying 100mb line connected but when i look at xbox settings the i.p address is 0.0.0.0 and i cannot change this..do any of you know what the problem could be?..thx for your time.
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Thu Oct 28, 2004 8:12 pm Post subject:
Hi ferryman51,
Lets see if we can get you going eh?!?!
You can setup your XBOX IP ADDRESS under the evox dashboard 'system management' or 'system settings' screens.
TURN STATIC IP = ON (or YES)
Then set your xbox ip address, subnet etc
Once you set your XBOX IP you will have to scroll down to the very bottom of that page and choose 'SAVE & EXIT'.. Then reboot your xbox..
Your XBOX IP ADDRESS will then be shown.
if you need more help just ask. Thats why we are here.
for some reason evox wouldnt work correctly for me.but when i used avalaunch i could change my ip settings and they were saved for next time i used my xbox..problem sorted m8..thx for the advise.
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Wed Nov 03, 2004 6:42 am Post subject:
Hi,
glad to hear it.. Good work.. You sorted it yourself!
Must have been a corrupt evox.ini file there..
if you reinstalled it im sure it would have worked..
Posted: Fri Nov 26, 2004 3:32 am Post subject: similar problem as above
I am having a similar problem as the person above.
Type nothing there
IP 0.0.0.0
Line Status 100/duplex
set up Network yes
use Static yes
IP 192.168.200
Subnet 255.255.255.0
Gateway 192.168.1.1
DNS 0.0.0.0
It only says exit at the bottom, not save and exit.
Any help would be appreciated
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Fri Nov 26, 2004 4:40 am Post subject:
billyhni,
Sounds like someone has removed that option or something.. Maybe your EVOX DASHBOARD is corrupt! You can reinstall it using the XBOXHQ AUTOINSTALLER (thats the easiest way).. Other then that you could ftp the evox.ini and evox.xbe to your xbox and replace!
Its not a big problem but you may need to learn a little to get it fixed..
Just to check:
You are running EVOX DASHBOARD arent you or are you trying to use the XBOXLIVE dashboard (xboxlive dash wont work with ftp).
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum