ochentay4 Xbox-HQ User Xbox Version: Xbox v1.1 Modded: Softmodded
Joined: Jan 29, 2007 Posts: 10
Posted: Wed Apr 25, 2007 12:50 am Post subject:
i am going to install sid5 on my xbox1.3 that its not modded for the first time and i was planning to use Hacked Dash / MS Dash option, is there any bug that i have to be aware of? i will use mechassault method
thanx in advance!
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Wed Apr 25, 2007 1:01 am Post subject:
ochentay4 wrote:
i am going to install sid5 on my xbox1.3 that its not modded for the first time and i was planning to use Hacked Dash / MS Dash option, is there any bug that i have to be aware of? i will use mechassault method
thanx in advance!
I recommend only using the Single Boot Softmod with NO virtual C. I'm pretty sure this option will work unlike a few others which are bugged.
ochentay4 Xbox-HQ User Xbox Version: Xbox v1.1 Modded: Softmodded
Joined: Jan 29, 2007 Posts: 10
Posted: Wed Apr 25, 2007 3:45 am Post subject:
imsorry but i reread the pdf and i dont understand, do i have to install softmod first and then oneclick install in aid or i have to softmodd again before one click install?
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Wed Apr 25, 2007 4:37 am Post subject:
ochentay4 wrote:
imsorry but i reread the pdf and i dont understand, do i have to install softmod first and then oneclick install in aid or i have to softmodd again before one click install?
you need your box to be softmodded in order to use the aid disc. once that is done you can proceed to use the softmod one-click option.
just remember only to use the single boot with no virtual c for now, it seems to be one of the only ones that actually work.
4realleb Xbox-HQ Newbie Xbox Version: Xbox v1.1 Modded: Softmodded
Joined: Apr 21, 2007 Posts: 3
Posted: Wed Apr 25, 2007 1:41 pm Post subject:
Hey DJB I kinda went over and tried to install sid 5 one last time with the virtual C+ eeprom on single boot. I noticed that on sid 4.5 after you restarted it finished the softmod installation. It did not do this with sid 5.0, instead I got an error 21 (which I fixed with AId 4.0). So I went and browsed around the gamesave folder, I found a file named install.xbe, and launched it. This file finished the softmod process, however it copied the stock msdash files to the unmounted c drvie. My gues is that the C drive was never mounted in the first place. So when I restarted my xbox it restarted straight to an unmodded xbox. I think the problem is that it is not finishing the softmod installation properly. Hope this helps. Oh and it does the same thing with the AID 4.0 one click install system.
EDIT: DJB I think I figured out your problem it looks like an error in the script, however I have changed it now and will post back with the results asap.
EDIT: Nvm, but I do think it is the fact that the install.xbe file is not launching on reboot. I think that is what you need to check. Also on sid 4.5 it created a file on the E drive named sid4hd.bin which is what I am guessing is the mountable C drive. ANyways, hope this helped.
Last edited by 4realleb on Wed Apr 25, 2007 2:03 pm; edited 2 times in total
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Wed Apr 25, 2007 1:46 pm Post subject:
4realleb wrote:
Hey DJB I kinda went over and tried to install sid 5 one last time with the virtual C+ eeprom on single boot. I noticed that on sid 4.5 after you restarted it finished the softmod installation. It did not do this with sid 5.0, instead I got an error 21 (which I fixed with AId 4.0). So I went and browsed around the gamesave folder, I found a file named install.xbe, and launched it. This file finished the softmod process, however it copied the stock msdash files to the unmounted c drvie. My gues is that the C drive was never mounted in the first place. So when I restarted my xbox it restarted straight to an unmodded xbox. I think the problem is that it is not finishing the softmod installation properly. Hope this helps. Oh and it does the same thing with the AID 4.0 one click install system.
Yes there's massive problems with SID 5, the only one that will work on both AID 4 and SID 5 is the Singleboot with no Virtual C.
HD Xbox-HQ Newbie Xbox Version: Xbox v1.1 Modded: Softmodded
Joined: Dec 28, 2006 Posts: 5
Posted: Sat Apr 28, 2007 7:31 am Post subject: Two Trainer files may be corupt
phreakazoidz wrote:
i have install AID 4.0
why my XORED Trainer Launcher is Freeze ??
what have to do??? or i must Format my HDD ??
i use Xcuter3 and i install modchip install , its corect?
TIA
Phreakz
After installing C/Trainers from the AID 4.0 addon pack, I had the same boot troubles as everyone else with Evo x. I trouble shot by removing different trainer files out of C/Trainers one at a time. After I removed the two trainers named (Indiana Jones TET p8 pal.etm) and (ConkerLiveandReloaded.ETM), Evolution X would boot and run normal and all trainers were recognized. I also went ahead and removed the two corrupt files from Xored Trainer Launcher, and from XBOX Media center Trainers file. My Xecuter 3 X-Box now works great.
kochon Xbox-HQ Enthusiast Xbox Version: 1.6 Modded: Softmod UnleashX
Joined: Dec 31, 2005 Posts: 26 Location: Wanna see me? Look behind you!
Posted: Sat Apr 28, 2007 1:26 pm Post subject:
kochon wrote:
yo!
just downloaded/burned AIO with all the addons, and now i run it, it shows the splash screen, then the menu for like 3 seconds then reboots... very frustrating... please help!
hello??? please help me guys _________________ Kochon
HD Xbox-HQ Newbie Xbox Version: 1.6 Modded: Softmod UnleashX
Joined: Dec 28, 2006 Posts: 5
Posted: Mon Apr 30, 2007 7:48 am Post subject: Evolution X Boot Fix
DJB wrote:
FinalCloud wrote:
A few people are reporting a rebooting problem taking place when EvoX is installed as the dashboard. They say it has something to do with the naming of the Trainers folder, and if that folder is renamed to something else, EvoX loads without any probs.
May be worth a quick check mate.
FC
K I'll take a look.
For everyone having trouble with evolution x as dash board read the rest of this quote. After installing C/Trainers from the AID 4.0 addon pack, I had the same boot troubles as everyone else. I trouble shot by removing different trainer files out of C/Trainers one at a time. After I removed the two trainers named (Indiana Jones TET p8 pal.etm) and (ConkerLiveandReloaded.ETM), Evolution X would boot and run normal and all trainers were recognized. I also went ahead and removed the two corrupt files from Xored Trainer Launcher, and from XBOX Media center Trainers file (thus Xored no longer froze up with the two corrupt trainers removed). My Xecuter 3 X-Box now works great. NOTE: I had to use File Manager from aid 4 disk to access the trainer files, after Evo X was installed as dashboard.
lazerusrm Xbox-HQ Newbie Xbox Version: 1.6 Modded: Softmod UnleashX
Joined: Apr 30, 2007 Posts: 2
Posted: Mon Apr 30, 2007 4:47 pm Post subject:
Here is a bug, i have a wifi ethernet bridge, and network connectivity works, but every time i shut off the xbox, i have to to power cycle the ethernet bridge for the network to function, otherwise there is no connectivity. I am downloading SID 5.. i'll try this again and see if it will work
It gets annoying because i have it as a media server for photos, and a video library of over 300 vids and my family has problems trying to use it
j8994 Moderator
Joined: Feb 05, 2006 Posts: 1853 Location: Tennessee, USA
Posted: Mon Apr 30, 2007 4:51 pm Post subject:
thats not a bug of aid. if you running xbmc, then please submit the problem to the xbmc team. also test out the adapter on a different pc or sumthing, as mine dead that right before it died on me. mine was a dlink. _________________ Please post all PC Questions at PC-HQ.com
ren3gade Xbox-HQ Elite Member Xbox Version: xbox v1.0 Modded: MA- Krayzies 1.1 w/ Aid 4
Joined: Jan 29, 2006 Posts: 247 Location: Dark Side Of The Moon
Posted: Thu Jun 21, 2007 8:57 pm Post subject: Re: Two Trainer files may be corupt
HD wrote:
phreakazoidz wrote:
i have install AID 4.0
why my XORED Trainer Launcher is Freeze ??
what have to do??? or i must Format my HDD ??
i use Xcuter3 and i install modchip install , its corect?
TIA
Phreakz
After installing C/Trainers from the AID 4.0 addon pack, I had the same boot troubles as everyone else with Evo x. I trouble shot by removing different trainer files out of C/Trainers one at a time. After I removed the two trainers named (Indiana Jones TET p8 pal.etm) and (ConkerLiveandReloaded.ETM), Evolution X would boot and run normal and all trainers were recognized. I also went ahead and removed the two corrupt files from Xored Trainer Launcher, and from XBOX Media center Trainers file. My Xecuter 3 X-Box now works great.
Thx Now my Xored works fine. Just delete those 2 files and all is good. Thx for info so I didnt have to delete all my trainers.
Love this Site and its people.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Fri Jun 22, 2007 1:07 am Post subject:
The AID 4.02 includes a new Addon pack for trainers, so this issue is fixed.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 7,803 | 
Guests: 714 | 
Members: 2 
Forums 
