Posted: Mon Apr 16, 2007 1:01 am Post subject: HELP!!! NO Dashboard
I installed the whole Softmod thingy. After i restarted the dashbaord was there. BUt the next time time I resatred it toook me too the softmod settings screeen. I insatlled it again. Now everytime i restart theres no dashboard, just the whole error 21 screen. ANd when ever i try to load the installer in james bond, the game restarts
help please
thanks
Burner6999 Xbox-Hq Genius
Joined: Aug 15, 2006 Posts: 1426 Location: Colorado
Posted: Mon Apr 16, 2007 1:17 am Post subject:
You are going to have to do a hotswap. Look in the tutorials section and there is a tut on how to do it.
scalon Xbox-HQ Newbie
Joined: Apr 17, 2007 Posts: 1
Posted: Wed Apr 18, 2007 10:39 am Post subject:
ok, here's what i did after having the same problems...
I got my dash to come back on after trying to re-attempt the damn thing 3 times of the game restarting everytime I would try to load the game save. Finally on the 3rd attempt i ejected the cd when it tried reloading the game. The screen froze to a blank screen. I then waited about 30 seconds and shut down the xbox and restarted it. After restarting, the xbox became the normal unmodded box again. Try again... I'm going to attempt at #3 to get this SID5 to work. I'll post again as soon as I figure this damn thing out!....
DJ623- Xbox-HQ Newbie
Joined: Apr 15, 2007 Posts: 3
Posted: Sun Apr 22, 2007 6:26 pm Post subject:
scalon wrote:
ok, here's what i did after having the same problems...
I got my dash to come back on after trying to re-attempt the damn thing 3 times of the game restarting everytime I would try to load the game save. Finally on the 3rd attempt i ejected the cd when it tried reloading the game. The screen froze to a blank screen. I then waited about 30 seconds and shut down the xbox and restarted it. After restarting, the xbox became the normal unmodded box again. Try again... I'm going to attempt at #3 to get this SID5 to work. I'll post again as soon as I figure this damn thing out!....
i tried that... on the third time it shows the X from the mod thingy for a second then it goes to the error 21 screen
till no luck
mrjames2u2 Xbox-HQ Newbie
Xbox Version: 1.6 Modded:
Joined: Dec 10, 2005 Posts: 6
Posted: Mon Apr 23, 2007 7:26 am Post subject:
what auto installer are you using
AngelosDracul V.I.P. Lifetime
Xbox Version: 1.6 Modded:
Joined: Mar 24, 2005 Posts: 1755
Posted: Mon Apr 23, 2007 7:42 am Post subject:
Doesn't matter what softmod version he's using. He's going to have to hotswap.
Follow those instructions to the T. If you skip one, or mis-read you can brick your hard drive, and be without your xbox. _________________ "That which does not kill you, only makes you stronger."
with error 21 something is wrong with dash
install hack dash onto e file
AngelosDracul V.I.P. Lifetime
Xbox Version: 1.6 Modded:
Joined: Mar 24, 2005 Posts: 1755
Posted: Mon Apr 23, 2007 7:49 am Post subject:
If his softmod exploit isn't launching, he will have to do a hotswap, or get a chip. There is no other option. Thank you, James, but I believe I've been doing this a wee bit longer than thou. _________________ "That which does not kill you, only makes you stronger."
i just have the same problem with my xbox
i just re install my soft mod and restore my dash
AngelosDracul V.I.P. Lifetime
Xbox Version: 1.6 Modded:
Joined: Mar 24, 2005 Posts: 1755
Posted: Mon Apr 23, 2007 8:23 am Post subject:
DJ623- wrote:
ANd when ever i try to load the installer in james bond, the game restarts
He can't launch his game save exploit. Thus, re-installing the softmod is a no-go. Impossible without a hotswap. _________________ "That which does not kill you, only makes you stronger."
Last edited by AngelosDracul on Tue Apr 24, 2007 11:00 pm; edited 1 time in total
DJ623- Xbox-HQ Newbie
Xbox Version: 1.6 Modded:
Joined: Apr 15, 2007 Posts: 3
Posted: Tue Apr 24, 2007 10:56 pm Post subject:
where in the hotswap tutorial does it say to open my xbox? it says i need screw drivers to open it?
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Thu Apr 26, 2007 2:48 am Post subject:
You need a Torx 20 to get the case off and if your going to take the screws out inside you will need a Torx 10. If your taking out the hard drive screws then you will need a Torx 15. Wont need the 15 though, and may only need a 20 if your only hot swapping.. _________________
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum