Posted: Sun Apr 01, 2007 8:04 pm Post subject: xecuter 2.6 ce solderless
ok guys heres my troubles....i have a solderless 2.6 been using it for a while i usually take it off to mod other xboxes then i put it back on..and no problems! till yesterday i did a buddys xbox and when i installed it back on mine it gives me the power cycle thing...on off on off the on and a frag...what did i do wrong?>? _________________ <iframe src="http://gamercard.xbox.com/BiGGDoGGFreSH.card" scrolling="no" frameBorder="0" height="140" width="204">Put your gamertag here too.</iframe>
joho5 Xbox-HQ Freak
Joined: Jan 22, 2007 Posts: 699 Location: Texas
Posted: Tue Apr 03, 2007 6:19 pm Post subject:
something isnt connected as well since you took it last off and on...or either the bios file got corrupted...do you just have one bios on the chip?
or do you have any other bios files stored up on the other banks?
S1L3NTA55A55IN Xbox-HQ Experienced
Joined: Jan 24, 2006 Posts: 125
Posted: Tue Apr 03, 2007 7:46 pm Post subject:
Its the connection to the motherboard.I have the same chip but i soldered it.And i had gotten the same problem.So i took it apart and checked it out.Its turns out i'm not good at soldering.One if the pins that the chip slides onto came loose so i had to resolder it in place.Once I did that it worked.Every once in a while if i move the xbox around alot that same pin will come loose and then i have to resolder it.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum