Posted: Fri Mar 11, 2005 2:41 pm Post subject: how do you put led lights in xbox
can you put led light in my paddle and xbox and stilll play online i think this might be a stupid question but owell and can someone tell me how to do it i can solder
XboxXXX V.I.P. Lifetime
Joined: Oct 09, 2004 Posts: 1873 Location: Hampshire, UK
Posted: Fri Mar 11, 2005 8:02 pm Post subject:
Adding LEDS doesn't require a Modchip so you can still use Xbox Live!
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sat Mar 12, 2005 5:23 am Post subject:
Paddle? I am thinking you are talking about your controller, correct?
When you open that puppy up you will see a series of wires going to a pad like object. On this pad, you will see red wire, some other color wires, and a black wire.
The red is your power, the black is your ground. So, just buy some LEDs and some thin wire. 28guage if you can. If you can't find any this thin, just take an old phone line and tear it open. Use those wires, they work good.
Glue your LEDs at various points in your controller. But, before you wire them up make sure your controller closes back up properly. If so, then wire the postive legs all to the power point, and the negative legs to the ground point. All should work good.
TheModGOd
----------------------
http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,340 | 
Guests: 1304 | 
Members: 1 
Forums 
