Posted: Fri Jan 21, 2005 1:41 pm Post subject: Auto-Installer.Deluxe.v1.01 not auto installing ;/
Hello.
I have tried a few times to makes this iso work on my box but the box dosenīt recon the disc.
I have burned numeros of other stuff with this dvd-rs and cd-rs witch work wih my box but Auto-Installer.Deluxe.v1.01 just dosenīt start.
Quote:
INSTALLATION NOTES:
-------------------
1) Burn the ISO to an appropriate media, depending on your Xbox DVD-ROM Drive.
Note: DVD Decrypter is recommended for burning the ISO on to a DVD.
Note 2: CD-R/RW users need to run the DummyCD program before burning.
2) Insert CD/DVD into the Xbox, then boot it with your modchip on.
DVD Decrypter iso info.
Size 691mb mode1/2048.
T-Rizzle Xbox-HQ Freak
Joined: Dec 29, 2004 Posts: 617 Location: South Dakota, USA
Posted: Fri Jan 21, 2005 3:20 pm Post subject:
This might be kind of a redundant question, but do you have your xbox modded in any way? If you do, list some of your specs, such as chip, bios, xbox version, etc. That way we can answer your question better.
If you already have your box modded, try redownloading the .rar file. The dvd iso should be around 1.6 gigs, and after using the dummy cd the cd-rw should be around 700 meg. Make sure that you using cd-rws and dvd-r's. Other than that, I'd need more info to get your directed to the proper answer. _________________ XBOX v1.6c
X3CE
Xapt3r 1.6 solderless adapter (works on a 1.6c!)
X3 3294 1.6plus
80 GIG WD
XBMC Dashboard
X3 Control Panel Black
Halo 2 Jewel with Jewel LED Kit (green)
XBOX 360
Stock
Nintendo Wii
Stock
funkydopeloven Xbox-Hq Genius
Joined: Nov 30, 2004 Posts: 1942
Posted: Fri Jan 21, 2005 6:38 pm Post subject:
you should burn it at 1X aswell and depending on how long ago you got it, the AID on the http got corrupted
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Fri Jan 21, 2005 9:18 pm Post subject:
See if you can get your hands on a demo version of CloneDVD2.
Then, after it's installed select, Write Existing Data.
Select the aid.iso file and then click burn. I have suggested this to many people who had problems burning the installers in the past. Nobody has ever failed with this program. I have never burned a coaster yet in the two years I have been using this program for DVD's and for the Xbox.
Let me know how it goes.
http://www.elby.ch is the website that has this program. I just didnt' know if they had a demo still.
TheModGod
----------------------------
http://www.xbox-hq.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
Triton Xbox-HQ Newbie
Joined: Jan 21, 2005 Posts: 4
Posted: Sat Jan 22, 2005 6:29 pm Post subject:
Hello.
I have an alladin chip witch I have soldered on and am now using superdisc 3.7.x.x witch is working perfect.
I first burned the autoinstaller iso with stomped at 1x a dvd-r (about 1.6gig). The xbox didenīt recon the disc (the disc is the same brand as the one I installed superdisc with).
I then used the dummy program for remaking the iso to an cd-r version and burned the cd in 16x speed with the exakt same thing happening (xbox canīt read it) (I have an Thomson dvd/cd-r in my box.
Sorry canīt say witch bios it is on the chip right now sins the bios flash utill dosenīt recon the bios (says unknown) but i think itīs a m8 bios or x2 version xxxx.
I have allso tested a new HD just incase superdisc blocked this version for some reason without luck.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sun Jan 23, 2005 1:02 pm Post subject:
Hm, this is weird. If your xbox can boot a burned dvd disc with xbox content it should be able to boot this.
Actually, is SuperDisc 3.7.x.x Linux based??
If so, that will explain why that booted and not mine, as my installer is not in linux format.
Cromwell is the BIOS put on the modchips when shipped normally for legal reasons, but my auto-installer will only work if the chip is loaded with a hacked bios.
Dunno if this is the solution or not, but it's all I can think of...
Triton Xbox-HQ Newbie
Joined: Jan 21, 2005 Posts: 4
Posted: Sun Jan 23, 2005 2:00 pm Post subject:
Quote:
Cromwell is the BIOS put on the modchips when shipped normally for legal reasons, but my auto-installer will only work if the chip is loaded with a hacked bios.
Well all my backuped games work perfect and they shouldent do so if it was an cromwell bios? or does superdisc make that work?
When the box boots it says Evox (when the xbox logo aperas) before it boots superdisc (on the harddrive).
The reason that I have not flashed the bios my self is becouse I heard that alladin chips allways dosenīt like 3e part flahers and I canīt find Alladins own flash util that does NOT ned the flashcard.
Triton Xbox-HQ Newbie
Joined: Jan 21, 2005 Posts: 4
Posted: Sun Jan 23, 2005 6:06 pm Post subject:
Itīs WORKING!!
Just donīt ask me why but it flashed a newer x2 bios and it still didenīt want to boot. Installed cloneDVD2 and burned the same iso in the SAME way I have used the other programs (witch never has failed me ones before) and woala it worked.
BTW a great program this indead is (when you get it to work )
Superdisc may do the job but with autoinstaller it feals that you atleast know what you are installing and were on the drive.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sun Jan 23, 2005 9:19 pm Post subject:
Cool, glad you finally got it to work
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,917 | 
Guests: 1298 | 
Members: 0 
Forums 
