Posted: Sun Oct 03, 2021 4:38 pm Post subject: 1.2 Board spitting Christmas lights
Hey all, hope this is the right spot. Couldn't find one for repair. Apologies if it's not. Got a 1.2 board here spitting Christmas lights at me (orange and green, power off, power on and repeat, red and green). It's not the disk drive or hard drive, I've tried alternative ones in their place. There is no modchip though I did remove one (Aladdin) as I was getting no signal from it beforehand. IDE cable is installed right way up. All caps look fine, clock cap has been removed. I don't see any broken tracing. I will repaste it as soon as some thermal paste comes in the mail. PSU looks fine to me too. Thoughts?
Xbmcmodsforxbox Moderator
Joined: Aug 13, 2018 Posts: 605 Location: United States
Posted: Tue Oct 05, 2021 11:42 pm Post subject: Re: 1.2 Board spitting Christmas lights
TinyTree wrote:
Hey all, hope this is the right spot. Couldn't find one for repair. Apologies if it's not. Got a 1.2 board here spitting Christmas lights at me (orange and green, power off, power on and repeat, red and green). It's not the disk drive or hard drive, I've tried alternative ones in their place. There is no modchip though I did remove one (Aladdin) as I was getting no signal from it beforehand. IDE cable is installed right way up. All caps look fine, clock cap has been removed. I don't see any broken tracing. I will repaste it as soon as some thermal paste comes in the mail. PSU looks fine to me too. Thoughts?
Is an AV cable attached to the console?
If so, Orange/Green flashing indicates that the Xbox is not recognizing that it is attached.
The multiple power cycle then flashing Red/Green (FRAG) indicates that one of the major sections of the Xbox is not functioning properly: hard drive, DVD, CPU, etc.
On a 1.2 Xbox, it should display an error screen on the TV set with a number in the upper left-hand corner of the screen.
Do you see such a screen?
If so, what is the number?
johnboy1432 Xbox-HQ Newbie
Xbox Version: 1.0/1.1/1.4/1.6 Modded: X2/X3/XST/Xenium
Joined: Apr 16, 2013 Posts: 5
Posted: Wed Oct 06, 2021 12:15 am Post subject: Re: 1.2 Board spitting Christmas lights
kaos_engr wrote:
On a 1.2 Xbox, it should display an error screen on the TV set with a number in the upper left-hand corner of the screen.
Posted: Sun Oct 24, 2021 1:08 am Post subject: Re: 1.2 Board spitting Christmas lights
TinyTree wrote:
Hey all, hope this is the right spot. Couldn't find one for repair. Apologies if it's not. Got a 1.2 board here spitting Christmas lights at me (orange and green, power off, power on and repeat, red and green). It's not the disk drive or hard drive, I've tried alternative ones in their place. There is no modchip though I did remove one (Aladdin) as I was getting no signal from it beforehand. IDE cable is installed right way up. All caps look fine, clock cap has been removed. I don't see any broken tracing. I will repaste it as soon as some thermal paste comes in the mail. PSU looks fine to me too. Thoughts?
Does the console power on when you plug the power cable in? _________________
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum