Posted: Thu Sep 06, 2007 2:32 pm Post subject: Name that MOD CHIP
Can anyone tell me whether this is a MOD CHIP and if so any ideas as to the type it is.
DSCF0030.JPG
Description:
Filesize:
600.28 KB
Viewed:
343 Time(s)
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Thu Sep 06, 2007 4:40 pm Post subject:
Looks like something duo-X wold make.
gfunk1851 Xbox-HQ User
Joined: Aug 25, 2007 Posts: 14
Posted: Thu Sep 06, 2007 5:13 pm Post subject:
Wes yet again genius I had a look its a Xbox Duox2 Chip Cromwell/FlashBios Edition -One chip for v1-v1.6 Xbox - Very easy to disable mod. - LED blinks when it is in operation - Dual bios feature ( 2 x 512KB) - 9 solder points + 2 wire Installation or LPC port rebuild + 2 wire - ideal for xbox linux - please refer to installation section on flashing
Listed by: HonSon Modchips (China)
Just need to find instructions on net for it now so when I fix my error 16 I can look at installing a dashboard.
Thanks a million
gfunk1851 Xbox-HQ User
Joined: Aug 25, 2007 Posts: 14
Posted: Thu Sep 06, 2007 5:18 pm Post subject:
Now I am confused the site which shows it as a duo x also shows the same board as ax ecuter with the following spec XBox X-ecuter Chip
1. Only 1 wire used (but 9 soldering points)2. Easy to install - 5 minutes
3. Direct boot all backups 4. Direct boot all original imports
5. Macrovision protection off 6. DVD dongle lock off
7.100% Evolution-X compatible 8. No patches hack
9. No reset on eject hack 10. HDD patch for larger drives
11. Works on all Xbox models 12. No version detection needed
I can only see one wire that is soldered do you think its a copy ?
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Thu Sep 06, 2007 5:24 pm Post subject:
fix for error 16:
1. There are some bios'es around that allow the chip to boot past the clocksetting. (do a search!). So how do you get that bios on your chip because you cant boot to a flash program or something? Well you need to have an external flasher.
It seems the m8 bios will take care for you of booting past the clocksetting. Or use the latest Xecutor bios
2. This is the more easy and newbie friendly strategy
-Get a friend with a modded xbox.
-Unlock his hdd with eeprom management from a slayer evo-x cd.
-Than, place his hdd in your xbox.
-Boot with your chip on.
-Now the xbox DOES find a dashboard when you boot in original mode and you can set the time in the msdashboard clock settings.
-Shut off xbox and remove your friends hdd
-PLace his hdd back in his xbox and lock it again
-Install your hdd
-(clock has been set) So boot up with slayer cd.
-Install normally whatever you wanna install
-lock hdd
If you get an error 13 after this, please read up on the error 13
fix for error 13:
You can use the dashupdate found on most new xbox games! Be sure to 1st unplug your ethernet cable before you do so!!!
Besides that, just use a good installation disc and all is fine. Use a 2.6 slayer or something similar
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Thu Sep 06, 2007 5:26 pm Post subject:
Post a link to the site you found the 2 chips it may be.
gfunk1851 Xbox-HQ User
Joined: Aug 25, 2007 Posts: 14
Posted: Thu Sep 06, 2007 5:35 pm Post subject:
the site is http://www.fuzing.com/qrx/xbox-chip . However I found a picture on XBOX scene a moment ago which seemed to support the fact it is an executer chip. Unfortuntley I do not know anyone who I can hotswap with but I will try the HD Recovery that I have to do it via my PC.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Thu Sep 06, 2007 5:41 pm Post subject:
Thay look the same to me the onley way to go about it is to find a bios thay can both use.
gfunk1851 Xbox-HQ User
Joined: Aug 25, 2007 Posts: 14
Posted: Thu Sep 06, 2007 7:13 pm Post subject:
Yeah I thikn the Duo x is an incorrect picture as my MOD defintley only has the one wire and it states two in the spec so I am going to assume I a an Xecutor MOD. I will try HD recovery tommorow and start again this time with slayer 2.7 as I did not have much joy with AID 4.1.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Thu Sep 06, 2007 7:23 pm Post subject:
Hay man got to go with what works for you.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,235 | 
Guests: 1193 | 
Members: 2 
Forums 
Thay look the same to me 
the onley way to go about it is to find a bios thay can both use.
