Posted: Fri Oct 08, 2004 8:34 am Post subject: Aladdon 1.6 confusion / errors
Hi. I am currently attempting, unsuccessfully, to mod a 1.6 xbox with an aladdin chip. The chip is an XXXXXXXXX like the one shown in this picture.
I have installed it exactly as in this guide. I admittedly screwed up a couple of the welds and put them onto the wrong spot but I have corrected this all now.
I am a little confused as to what the jumper pin on the side is for? I have placed the chip flat onto the motherboard and soildered the points accordingly. Is this correct, I think I understand someone on another thread saying something about using the jumperpins and pluging them into the place which says flash on other boards.
Another thing, I have soildered D0 onto some little spot on the back, but it also says something about earthing it, what does this do??
Currently when I turn the xbox on it will flash red green orange red orange green orange... green orange green orange green orange.... green orange green orange red green red green etc.
It also does not seem to make a difference wether I use the long or short press of the power button.
Nothing appears on the tv at all.
If anyone can enlighten me as to what I am doing wrong it will be greatly apreciated. Thanks
ps. need to reboot as mouse is not responding, then I will fix up beginning of post
johntramp Guest
Posted: Fri Oct 08, 2004 8:43 am Post subject: Aladdon 1.6 confusion / errors [FIXED]
disregard the first post, turns out I can't edit the post so here it is again.
Hi. I am currently attempting, unsuccessfully, to mod a 1.6 xbox with an aladdin chip. The chip is an Aladdin XT Lite (v1.6 compatible) like the one shown in this picture: https://scrappy.safe-order.co.nz/secure/www.x-mods.co.nz/images/aladdinxtlite.jpg .
I have installed it exactly as in this guide http://aladdinlive.com/Aladdin1.6b.jpg . I admittedly screwed up a couple of the welds and put them onto the wrong spot but I have corrected this all now.
I am a little confused as to what the jumper pin on the side is for? I have placed the chip flat onto the motherboard and soildered the points accordingly. Is this correct, I think I understand someone on another thread saying something about using the jumperpins and pluging them into the place which says flash on other boards.
Another thing, I have soildered D0 onto some little spot on the back, but it also says something about earthing it, what does this do??
Currently when I turn the xbox on it will flash red green orange red orange green orange... green orange green orange green orange.... green orange green orange red green red green etc.
It also does not seem to make a difference wether I use the long or short press of the power button.
Nothing appears on the tv at all.
If anyone can enlighten me as to what I am doing wrong it will be greatly apreciated. Thanks
-John
NVousMotorSports V.I.P. Lifetime
Joined: Jun 21, 2004 Posts: 111 Location: San Francisco California
Posted: Thu Oct 14, 2004 7:57 am Post subject:
I used another chip for a 1.6 install but i'll share my photos anyways in hopes that they will help you in your install. This is a regular aladdin chip and not the xt. The xt should have no problems when installed correctly.
I hope these help in any way. Im in the works of writing up a TUT for the aladdins but its taking some time because im including a troublshooting section so that every NOOB from ages 12 to 90 can figure it out. LOL well good luck on your install and keep at it. You'll get it.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 9,327 | 
Guests: 1244 | 
Members: 0 
Forums 
