Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Wed May 18, 2005 2:47 am Post subject:
It has been tested on various xboxes, from 1.0 to 1.6. Maybe the gamesave didn't copy properly. What kind of memory card are you using? I recommend using an official Xbox memory card coz the third party ones (action replay etc) are known not to work properly.
totalylost Xbox-HQ Experienced
Joined: May 09, 2005 Posts: 173 Location: Heber Springs
Posted: Wed May 18, 2005 2:48 am Post subject:
I am using a AR card.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Wed May 18, 2005 2:51 am Post subject:
totalylost wrote:
I am using a AR card.
That's the problem..
totalylost Xbox-HQ Experienced
Joined: May 09, 2005 Posts: 173 Location: Heber Springs
Posted: Wed May 18, 2005 2:57 am Post subject:
Will a xbox mem card work with my ar usb device to copy the file to it?
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Wed May 18, 2005 3:07 am Post subject:
totalylost wrote:
Will a xbox mem card work with my ar usb device to copy the file to it?
Yes it will, the actual action replay usb hardware is probably the only thing worth keeping out of the whole ar package, except for the software ofcourse
totalylost Xbox-HQ Experienced
Joined: May 09, 2005 Posts: 173 Location: Heber Springs
Posted: Wed May 18, 2005 3:14 am Post subject:
cool thanks. I will get me a xbox card then. thanks djb
rav3n2k Xbox-HQ Experienced
Joined: May 16, 2005 Posts: 109 Location: Australia
Posted: Wed May 18, 2005 8:48 am Post subject:
This may be a rather "noobish" problem, but I've been trying to figure out the XDK for a day or so now, and I'm still having trouble. Support for it isn't the easiest thing to get, as the program isn't either. I was just wondering, how to boot your xBox into "debug mode"? I'm being precautious, as I've heard incorrect bios use may cause harm to your mod.
Quote:
In order to get the Xbox to boot in Debug mode, you need to use the Phoenix BIOS Loader. I have already included a debug bios as the 2nd booting BIOS, so to start your Xbox in Debug mode, turn your Xbox on (with the modchip on offcourse), then as soon as you see something on your Monitor / TV, open your DVD Drive Tray, this will tell PBL that you want to use the 2nd BIOS, which is of course the Debug BIOS.
Does this mean I need to do anything "special" before booting my xBox and opening the tray? Sorry if this is a rather stupid question. I admit that I didn't search the forum, as I usually would, as this seemed to be the official help topic.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Wed May 18, 2005 10:06 am Post subject:
You need to set your xbox up properly with the XDK dashboard before you can use the Debug BIOS. And like said earlier we can't assist you in obtaining this.
There are however instructions (Appendix F I think) in the AID 2 Users Manual which explains how it's done...
rav3n2k Xbox-HQ Experienced
Joined: May 16, 2005 Posts: 109 Location: Australia
Posted: Wed May 18, 2005 10:27 am Post subject:
Got it. Installed it. Like I said, my problem is running it.
Ignore my main thread. Thanks for the prompt reply though.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Sun May 22, 2005 12:27 am Post subject:
What version is your Xbox?
Gunnerman Xbox-HQ User
Joined: Jan 24, 2004 Posts: 18
Posted: Thu May 26, 2005 2:24 am Post subject: Help...
Xbox 1.0 Chameleon x2 5032 bios maxtor 250 GB HD Install of aid 2.01 went fine but even when I install another dash xbox only boots to MS dash. Having trouble... trying to use Xunleashed for my main dash. installed ms dash to c: and other dash to F: Thank in advance
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Thu May 26, 2005 2:42 am Post subject: Re: Help...
Gunnerman wrote:
Xbox 1.0 Chameleon x2 5032 bios maxtor 250 GB HD Install of aid 2.01 went fine but even when I install another dash xbox only boots to MS dash. Having trouble... trying to use Xunleashed for my main dash. installed ms dash to c: and other dash to F: Thank in advance
I'd say it's possibe that your BIOS isn't reading F drive as a dashboard booting location, try install the unleashx dash to C instaed of F.
Gunnerman Xbox-HQ User
Joined: Jan 24, 2004 Posts: 18
Posted: Thu May 26, 2005 2:45 am Post subject: Thank you
will try that now
Gunnerman Xbox-HQ User
Joined: Jan 24, 2004 Posts: 18
Posted: Thu May 26, 2005 2:52 am Post subject: Heres what I have now..
Installed unleash on the c drive and restarted. shows x2 bios the normal boot strats but stops on a black screen
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 11,938 | 
Guests: 4593 | 
Members: 0 
Forums 
