Posted: Sun Jan 25, 2009 1:05 am Post subject: Upgrade from 3024 to 3294, now hangs
Ok since the 3024 bios I have not updated. I finally muster up the courage to do so with 3294 but now it hangs after splash screen. Have no access to chip menu and aid won't boot. I can get to flashbios 3.0.1 via eject/power boot but am unsure why this flash went bad I have v1.2 box and used 1-4 banks for 1 mg bios. What did I do wrong and how should I prepair bios?
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Sun Jan 25, 2009 2:03 am Post subject:
Just boot up the xbox with the eject and power button with the banks set to: on, on, off, off and flash protect off. Then just use the http flashing method to reflash those banks with the 3294 bios. Make sure you are using the correct bios for your version as well. _________________
I did that I haves a connectant chip so I assume it's a 1.2/1.3 and used x33294.bin and that's how I got the hang I had password protect on before flash would that be the culprate?
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Sun Jan 25, 2009 2:51 am Post subject:
Well flash protect means you can't flash the bios so it must be off for you to flash the bios. _________________
Ok I got it I went to the usual place and reflashed with 3029 not 3024 like I posted anyway disabled password protect not flash protect then reflashed again with 3294 and all is well again. Someone needs to write in big bold letters not to flash with password protect on chip enabled or bad things happen. Once again great site and thanks to anyone who answers posts with good advise. U guys are the best.
dartht33bagger Moderator
Joined: Apr 17, 2007 Posts: 5408 Location: Oregon, USA
Posted: Sun Jan 25, 2009 7:56 am Post subject:
No problem man _________________
ridergroov1 Xbox-HQ Enthusiast
Xbox Version: xbox v1.2/xbox Modded: x3
Joined: Jan 17, 2009 Posts: 41
Posted: Tue Jan 27, 2009 2:39 am Post subject:
How did you flash the bios? Is there a tutorial on this?
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Tue Jan 27, 2009 3:16 am Post subject:
Just use the AID bios flash tool and you will be fine man.
ridergroov1 Xbox-HQ Enthusiast
Xbox Version: xbox v1.2/xbox Modded: x3
Joined: Jan 17, 2009 Posts: 41
Posted: Tue Jan 27, 2009 3:30 am Post subject:
Got it all flashed here with the x3 3294 bios. Now what can I do? I hvea a fresh drive and the AID 4.4 disk burned. Don't know what is next. Just boots to bios.
wes213 Administrator
Joined: Feb 04, 2007 Posts: 10520 Location: Harrisonburg V.A.
Posted: Tue Jan 27, 2009 1:09 pm Post subject:
We are helping you in two threads so stick to the other thread, we don't need double posts bro.
ridergroov1 Xbox-HQ Enthusiast
Xbox Version: xbox v1.2/xbox Modded: x3
Joined: Jan 17, 2009 Posts: 41
Posted: Tue Jan 27, 2009 6:24 pm Post subject:
Got it. My bad.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum