Posted: Thu Jul 15, 2004 10:25 pm Post subject: D0 through point under video chip?
Hiya, This is my first post to the forums, so if I do something wrong, please let me know. I can be trained, I have a Ver 1.1 MB that has had the D0 trace pulled off from the point that the solderless "spring" adapter connect all the way back to the video chip set. Does anyone know if there is a through point under the video chip that I can bypass the bad trace to. Or, does anyone know where I can get a schematic for the 1.1 MB. Thanks.
App0lly0n Xbox-HQ Elite Member Xbox Version: 1.1 Modded: Chameleon v1.3
Joined: Mar 14, 2004 Posts: 204 Location: Newcastle, OZ
Posted: Tue Jul 20, 2004 11:48 am Post subject:
could you be a bit more spcific. What actually wrong with the D0
and what do you mean by
Quote:
D0 trace pulled off from the point that the solderless "spring" adapter connect all the way back to the video chip set
_________________ Xbox v1.2
Chameleon 1.3
XBMC
SeaGate Barracuda 200GB
Xlink TAG ToodR
Tree999 V.I.P. Lifetime Xbox Version: 1.1 Modded: Chameleon v1.3
Joined: Jun 21, 2004 Posts: 3
Posted: Tue Jul 20, 2004 4:29 pm Post subject:
Hi, Thanks for the interest. On the top side of the Motherboard, the D0 trace has been removed from the test point (the one that the solderless "spring" mod chip adapter goes into), all the way back to what I believe is the graphics chip (chip reads "NVIDIA" MCPX X3 F47830.1 0208B2 C KOREA). There is not enough of the trace left to "tack" a repair wire onto. I was hoping that some one might know what point, on the bottom of the board, under graphics chip could solder a repair wire to. Again, thanks for responding.
App0lly0n Xbox-HQ Elite Member Xbox Version: 1.1 Modded: Chameleon v1.3
Joined: Mar 14, 2004 Posts: 204 Location: Newcastle, OZ
Posted: Wed Jul 21, 2004 1:13 am Post subject:
I wouldnt have a clue about that. But have you emailed the people who have designed your modchip they should know what to do. _________________ Xbox v1.2
Chameleon 1.3
XBMC
SeaGate Barracuda 200GB
Xlink TAG ToodR
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,391 | 
Guests: 1294 | 
Members: 3 
Forums 
I have a Ver 1.1 MB that has had the D0 trace pulled off from the point that the solderless "spring" adapter connect all the way back to the video chip set. Does anyone know if there is a through point under the video chip that I can bypass the bad trace to. Or, does anyone know where I can get a schematic for the 1.1 MB. Thanks.
