Posted: Tue Oct 18, 2005 4:30 am Post subject: to anyone receiving the "Unrar Failed...code: 0" e
to the many people who have likely encountered this error while softmodding:
Code:
BEGIN extracting E........\files\apps.rar
Unrar failed "E:\apps\dvd2xbox\acl" error code : 0
END unrar operation
i had this happen on 2 xboxes...i got both of em to work by changing the video settings from NTSC 16x9 to 4x3 from within the same prog. you used to create the MS dash backup/install softmod.
all should go smoothly!
forahobby Administrator
Joined: May 22, 2003 Posts: 23945 Location: NSW, Australia
Posted: Tue Oct 18, 2005 7:53 am Post subject:
thanks for that info theinlaw.. Ill make this topic sticky so others can reply and tell you that it worked for them too..
jhondra V.I.P. Member Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Sep 12, 2005 Posts: 288 Location: Boise, ID
Posted: Tue Oct 18, 2005 2:39 pm Post subject:
How the HELL did you figure THAT out?
I had this same problem, but in my case, it ONLY ever happened when using SID 2.0. SID 3.0 on the same box with no changes worked fine (maybe SID 3.0 used a different video setting????)
Cool!
-Jhondra _________________ Xecutor 3 CE
X3 3294 Bios
14 total successful solder-mod xbox's (v1.0 to v1.6b; favorite is v1.4 Sept 2003; very clean motherboard and usually has Samsung DVD), including two 128MB upgrades and 2 X3 LCD/CP's.
pirrup V.I.P. Lifetime Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Feb 01, 2005 Posts: 1345 Location: belgium
theinlaw Xbox-HQ Newbie Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Oct 18, 2005 Posts: 2
Posted: Thu Oct 20, 2005 1:43 am Post subject:
i had 2 xboxes that had been previously used on HDTVs...the first box I modded wasn't set for that. Just to make sure, the only thing I changed in the settings was the aspect ratio, and it loaded just fine.
I was just a noob at this until Saturday night, and happen to stumble across that easy fix for it. Just tried to change all the settings on the 2nd and 3rd boxes to the ones that were on the 1st one that worked.
Hope it works for everyone else as well
AngelosDracul V.I.P. Lifetime Xbox Version: Xbox V1.0 Modded: Xecuter3 CE
Joined: Mar 24, 2005 Posts: 1755
Posted: Thu Oct 20, 2005 5:11 am Post subject:
Damn, d00d, nice find. I'm sure that will help un-piss-off a lot of HQers. Thanks, man! _________________ "That which does not kill you, only makes you stronger."
XBox - 1.1, Samsung 616t DVD-ROM, 65GBWD 7200RPM Drive, Logitech Wireless
MrFister Xbox-HQ Newbie Xbox Version: XBox V1.0 Modded:
Joined: Feb 12, 2006 Posts: 1
Posted: Sun Feb 26, 2006 2:52 am Post subject: XBMC unzip error code 0 with aid 3.0
Thanks for the tip. I spent nearly two hours attempting to figure this out before deciding to look on line for a similar problem. Cleared it right up and I still have some hair left.
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Mon Dec 11, 2006 9:48 pm Post subject:
Only just found this hehe.
Good find theinlaw
Like everyone else I'm surprised that the video settings was the problem with it. I remember testing SID 2.0 out at hobb's place and getting that problem.
Also, it will only be SID 2.0 that has that problem, becuase SID 3.0 and above only uses the ZIP format and doesn't use RAR at all. I stopped using it because it was coming up with these problems and I had no idea on how to fix it.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,626 | 
Guests: 2402 | 
Members: 1 
Forums 
