Joined: Apr 23, 2004 Posts: 120 Location: Coventry, England
Posted: Tue Jun 15, 2004 6:31 pm Post subject: Xenium on xbox live?
I have an ALX2 mod chip which is hardly heard of at all and made in the UK. This has now screwed up and I need a new one. Having only had it 6 months I'm not going to buy another one of those. The thing that made me buy it was that you could just turn it off by pressing the eject button to boot your xbox rather than power and so I could use live. I wanted to know if the xenium chip has anything similar as I have heard it is an excellent chip but I cannot find anything about how to turn it off on their website. Thanks. _________________ V1.4 Xbox
Xenium Modchip
X2 4983.67 Bios
Evox V+3935 Dashboard
Maxtor 250Gb HDD
2 Front USB
Custom Jewel lit by blue cold cathode
Blue controller port lights
Blue/Red Front LED
Internal IR Reciever
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Tue Jun 15, 2004 10:05 pm Post subject:
I love my Xenium for one reason. The ease of getting on Live.
All I do is turn my machine on, then it comes to a screen that allows me to select MS Dashboard, or Xecuter2.
If I select MS Dashboard, it launches the MS Bios and makes sure my modchip is off.
If I select Xecuter2 it loads that bios and then boots evox.
I love my chip...now, I have only had it for two months, so I can't vouch for any longevity yet.
When you order, it will come with a pin header and a wire for D0 connection. Good luck! _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Tue Jun 15, 2004 11:26 pm Post subject:
hi xboxhacker_uk,
Well the APPLEXV and the ALLADIN MODCHIPS have exactly the same features as you want..
The APPLEXV must have the XBOX power button held for 2 seconds for it to boot to the hacked bios and EVOX DASHBOARD.
If you just turn it on as normal it will load the normal Xbox Bios and show the original XBOX M$ Dashboard..
Same goes for alladin except it also uses your POWER LIGHT on the front of your xbox to show your HARD DRIVE ACTIVITY.. (not a bad idea at all).
anyway, hope that gives you some more ideas..
Also, I installed my first APPLEXV in November, 2003 and have not had a problem with any of the xboxes i have moded (over 30)
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Tue Jun 15, 2004 11:51 pm Post subject:
Quote:
it also uses your POWER LIGHT on the front of your xbox to show your HARD DRIVE ACTIVITY
Now that is a smart idea.
Sounds like there's another chip for all to think about _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Wed Jun 16, 2004 7:43 am Post subject: Xbox Power Led Flashes with HD(Hard Drive) Activity
yeh, ive also read a tutorial on how to add a led into your xbox to show your hdd activity..
Joined: Apr 23, 2004 Posts: 120 Location: Coventry, England
Posted: Wed Jun 16, 2004 12:02 pm Post subject:
Sounds like this chip is good I think I'll get it. With regards the HDD activity on the power LED I have soldered a 100K resistor to the IDE and then to the driver for the red side of the LED, this makes mine flash purple as it has blue/red leds in it but normally it flashes yellow. See this tutorial http://www.xbox-scene.com/articles/amberled.php _________________ V1.4 Xbox
Xenium Modchip
X2 4983.67 Bios
Evox V+3935 Dashboard
Maxtor 250Gb HDD
2 Front USB
Custom Jewel lit by blue cold cathode
Blue controller port lights
Blue/Red Front LED
Internal IR Reciever
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Thu Jun 17, 2004 4:59 am Post subject:
hey,
thanks for that link.. Exactly what i was looking for..
btw... you have a custom jewel.. How easy was it to take out your original XBOX JEWEL?? Im doing my xbox up at the moment..
THIS IS WHAT I HAVE:
Xbox v1.1 (Samsung Drive) hhehe
49LF020 Modchip
160gb Western Digital HD
EvoX Dashboard 3935
MediaxDashboard (matrix skin)
I have the following mods:
1 x fibre optic out
4 x orange game ports
1 x NAMCO Dead or Alive Skin (unreal!)
Im going to be adding a custom jewel (XBOX-HQ.COM JEWEL) and need to know where to start on how to remove it..
I have already taken out my aluminium inner of the xbox so i can get to it but what now!!
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Thu Jun 17, 2004 6:43 am Post subject:
You say you already have the metal shield off, so you should see where the jewel is when you turn the top half of case upside down.
You will want to heat it up (from the bottom side) with a blow dryer so you can get it off. It should weaken the adhesive enough, but be careful not to warp anything....yes, I know too late for me, but on with the mod.
After it feels pliable, turn it over (so you're looking at top of case)and try to get a butter knife under the jewel and gently start to pry it off. Just do a little at a time, if it seems to get tough to do, just heat it up a little more.
Once you have the jewel off you can freeze it to weaken any black adhesive left on it.
Then if you like you can even sand the green off and be left with a super clear jewel that still says xbox on it...
later hobs!! _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
xboxhacker_uk V.I.P. Lifetime
Joined: Apr 23, 2004 Posts: 120 Location: Coventry, England
Posted: Thu Jun 17, 2004 3:37 pm Post subject:
That's exactly how I did it and it is very easy. If you wanted to know I got my jewel here www.shop.craxtion.com _________________ V1.4 Xbox
Xenium Modchip
X2 4983.67 Bios
Evox V+3935 Dashboard
Maxtor 250Gb HDD
2 Front USB
Custom Jewel lit by blue cold cathode
Blue controller port lights
Blue/Red Front LED
Internal IR Reciever
greyhaze Xbox-HQ Newbie
Joined: May 14, 2004 Posts: 7
Posted: Thu Jun 17, 2004 3:59 pm Post subject:
Hi everyone
There is an easier way of clearing your green xbox jewel just get yourself a couple of old rags and a can of BRASSO metal polish then with one rag on your lap and the other loaded with brasso start rubbing away, with in about half an hour you should have a nice clear jewel. (and if you only use one rag a lap full of green paint so I found out ) _________________ Xbox v1.5
EvoX v3921
Xenium Mod chip
160gb HD
Evo M7 Bios
xboxhacker_uk V.I.P. Lifetime
Joined: Apr 23, 2004 Posts: 120 Location: Coventry, England
Posted: Thu Jun 17, 2004 5:58 pm Post subject:
Thanks for that. Sounds a lot easier than sanding. _________________ V1.4 Xbox
Xenium Modchip
X2 4983.67 Bios
Evox V+3935 Dashboard
Maxtor 250Gb HDD
2 Front USB
Custom Jewel lit by blue cold cathode
Blue controller port lights
Blue/Red Front LED
Internal IR Reciever
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum