Posted: Thu Apr 07, 2005 9:16 pm Post subject: avalaunch install help
I want to load avalaunch.0.49.3.rar in my xbox, I used wirar to open it and i deleted the read me file so im left with:
avalaunch.xml; avalaunch.xbe; and media
now im at the point where I need to figure out how to load it on my box, is there a real easy way to do this? Burn to disk then load it on? Could someone outline that for me? Read alot of tutorials but they keep sending me in circles.
I also wanna update my stick HDD to 200 GB Maxtor, load dashboard then worry about HDD swap?
appriciate any help!!!
velayo Xbox-HQ Experienced
Joined: Nov 11, 2004 Posts: 103 Location: Florida USA
Posted: Thu Apr 07, 2005 10:02 pm Post subject:
Two step process:
1. Download SID 2 from the download section Or any other softmod installer
2. Install the softmod
3. Download Xboxhdm 1.9
4. Format your 250 drive following the instructions included on the xboxhdm 1.9 files
5. Connect your 250 drive to your xbox.
Let me know if you run into any problems.
TO install the softmod exploit you are going to need one of the following games:
SPlinter Cell
Mechassault
There is another one I can;t remebmer now _________________ 2 Xbox V 1.0
Ltools 1.8 installed
160 gb hard disc (yes you can install one without a modchip)
I stopped being myself because I want to be what I was.
chemicalbrother Xbox-HQ Enthusiast
Joined: Apr 07, 2005 Posts: 44
Posted: Thu Apr 07, 2005 11:01 pm Post subject:
Yea I have no idea what you were talking about, I forgot to mention installed an X3CE mod chip on my v1.4 and have 3029bios, does that change anything? As you can tell Im pretty new to this.
And just to clearify again do I have to load up my dashboard before I swap HDD I think I probably should do it that way for confusion sake.
apperiate the help
funkydopeloven Xbox-Hq Genius
Joined: Nov 30, 2004 Posts: 1942
Posted: Fri Apr 08, 2005 2:01 am Post subject:
easiest thing you can do is download the AutoInstaller Deluxe, then long as your modchip is all good, you just stick in the new hdd and power up the xbox with the AID disk in. i don't know if your bios supports a hdd over 120 gigs though.
edit: its pointless to throw a dashbaord on your stock hdd if your takign it out anyway
chemicalbrother Xbox-HQ Enthusiast
Joined: Apr 07, 2005 Posts: 44
Posted: Sun Apr 10, 2005 12:47 am Post subject:
ok I did what you said and, yea like everything else Ive done didnt work, my hard drive just made a wierd noise then after a bit i got a screen saying theres a problem; error 9 ????????
One other question would it be just as easy to burn avalaunch to a DVD+R
Could you explain how this is done? I got avalauch.xbe, avalaunch.xml (no idea what this is or if i even need it); and a file folder containing skins.
What need to go on the disk and how does a guy go about doing this; also have a friend with Nero 6 so would like to use that to burn disk.
thanx
forahobby Administrator
Joined: May 22, 2003 Posts: 23945 Location: NSW, Australia
Posted: Sun Apr 10, 2005 7:01 am Post subject:
chemicalbrother,
very strange that you get error9.. Are you sure your modchip is fitted correctly and flashed.. You are running the right bios to me.. As long as its a X3 bios you will be fine..
Just remember about media.. There are 3 main types of dvdrom drives.. Only the SAMSUNG DVDROM can read CDR.. Its best to always burn to dvd-r anyway.
l8r all and hope you get it sorted. AIDeluxe is definately the way to go.
btw.. feel free to read the basic manual.. http://www.aid.xbox-hq.com
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 9,890 | 
Guests: 2465 | 
Members: 0 
Forums 
