Posted: Thu Mar 03, 2005 8:50 pm Post subject: HELP AGAIN!
Ok just when i thought i was out of the forest, i boot up my xbox, it turns off, then it boots about 3 more times and turns of, then it turns on and green and red led starts flashing and my xenium ice led light is red! i think my CPU overheated or something! help!
PS v1.6 xbox _________________ This is my signature.
Drago912 Xbox-HQ Member
Xbox Version: Xbox V1.6 Modded: Xenium ICE
Joined: Feb 15, 2005 Posts: 57 Location: Canada
Posted: Thu Mar 03, 2005 9:15 pm Post subject:
Did this just start?
Does it work when the chip isnt in.......can you boot to the ms dash?
Sounds like a wiring issue like a bad solder or bad DO wire.
steve97 Xbox-HQ Enthusiast
Joined: Nov 03, 2004 Posts: 39 Location: Canada
Posted: Thu Mar 03, 2005 9:23 pm Post subject:
Drago912 wrote:
Did this just start?
Does it work when the chip isnt in.......can you boot to the ms dash?
Sounds like a wiring issue like a bad solder or bad DO wire.
it started after i replace the damaged cord going to the hd to the dvd to the mobo, i'll try to boot it without the chip _________________ This is my signature.
steve97 Xbox-HQ Enthusiast
Joined: Nov 03, 2004 Posts: 39 Location: Canada
Posted: Thu Mar 03, 2005 10:06 pm Post subject:
screw it! i fucked my motherboard!!!!!! im just gonna buy a new mobo and hd and i will stop modding! _________________ This is my signature.
Shark2th Moderator
Joined: Nov 17, 2004 Posts: 5222 Location: Tennessee, USA
Posted: Thu Mar 03, 2005 10:23 pm Post subject:
Man I'm not positive that the mobo is shot. There just isn't enough info to be sure. Did you solder your xenium ice? _________________ http://twitter.com/HQ_Shark2th
steve97 Xbox-HQ Enthusiast
Joined: Nov 03, 2004 Posts: 39 Location: Canada
Posted: Thu Mar 03, 2005 10:43 pm Post subject:
Shark2th wrote:
Man I'm not positive that the mobo is shot. There just isn't enough info to be sure. Did you solder your xenium ice?
I fixed another problem, good old super glue to fix the plastic peice that holds the ATA wire in place, no i did not solder it and i found the problem, the D0 point came out so i solder the wire back in and still the same result. _________________ This is my signature.
TheModGod Xbox-Hq Legendary Xbox Version: Xbox V1.6 Modded: Xenium ICE
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Thu Mar 03, 2005 11:16 pm Post subject:
D0 is not your problem.
Your problem is one of three things.
One, your chip got bumped and needs aligned
Two, you scratched a trace on your motherboard
Three, the chip is bad.
Remove the chip and boot up your Xbox. If it boots up normailly, then you can rest assure it was just out of alingment. One downfall of a solderless chip.
TheModGod
-------------------------
http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
Drago912 Xbox-HQ Member
Xbox Version: Xbox V1.6 Modded: Xenium ICE
Joined: Feb 15, 2005 Posts: 57 Location: Canada
Posted: Fri Mar 04, 2005 12:04 am Post subject:
You got that right.....I gotta take my box apart almost once a week to re-align.
steve97 Xbox-HQ Enthusiast
Joined: Nov 03, 2004 Posts: 39 Location: Canada
Posted: Sun Mar 06, 2005 1:26 am Post subject:
so it doesnt matter if i have the D0 point soldered at all? plus my chip isnt solderless. Another thing is that should the IDE or ATA or whatever its called should be XBOX authentic? _________________ This is my signature.
Drago912 Xbox-HQ Member
Xbox Version: Xbox V1.6 Modded: Xenium ICE
Joined: Feb 15, 2005 Posts: 57 Location: Canada
Posted: Sun Mar 06, 2005 1:37 am Post subject:
If your using a solderless adapter then no soldering required. ...if yer not using a solderless adapter then you will have to solder the dO wile.
steve97 Xbox-HQ Enthusiast
Joined: Nov 03, 2004 Posts: 39 Location: Canada
Posted: Sun Mar 06, 2005 1:26 pm Post subject:
steve97 wrote:
so it doesnt matter if i have the D0 point soldered at all? plus my chip isnt solderless. Another thing is that should the IDE or ATA or whatever its called should be XBOX authentic?
also this all started after I locked my harddrive. _________________ This is my signature.
steve97 Xbox-HQ Enthusiast
Joined: Nov 03, 2004 Posts: 39 Location: Canada
Posted: Mon Mar 07, 2005 1:01 am Post subject:
i think it is my ATA cord causing the problem because when i remove my xenium ice it boots up then i get a error code 07 which is a hdd timeout i beleive. _________________ This is my signature.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum