HQ NETWORK:   XBOX ONE |  XBOX 360 |  AIDELUXE HQ Network: 15,118 | Guests: 9337 | Members: 0 


   Current Location: Forums New google drive   |   Which modchip is this?   |   Anyone here capable or interested in restarting XBConnect?   |   Error code 05   |   original xbox with 0 memory   |   Why cell damage is low with ratings   |   New Game - Fursan al-Aqsa - Knights of al-Aqsa Mosque   |   Xbox-Hq.Com VIP Member Testimonials   |   XBHD: A Full-Featured Original Xbox Adapter from EON Gaming,   |   Best place for XBox ROMS?   |   
  Home | Active Topics | CD/DVD Media | Downloads | Forums | Feedback | Games | HardDrives | Homebrew | My Profile | ModChips | Reviews | Search | SoftMods | Tutorials

Xbox Forums

Discuss all aspects of the original Xbox Console in our Interactive Xbox Forums..

Get Xbox Game Pass Ultimate
Xbox-Hq.Com :: View topic - DVD drive - modding a replacement
Xbox-Hq.Com Forum Index -> Xbox Case Modding Discussions
Post new topic Reply to topic  Goto page 1, 2  Next  
 DVD drive - modding a replacement View previous topic :: View next topic  
 
 
 
 
Prehistoricman
Moderator
Moderator

Xbox Version: 1.6 crystal
Modded: Xecuter 3

Joined: Oct 09, 2011
Posts: 406

Post Posted: Sun Nov 17, 2013 10:05 pm   
Post subject: DVD drive - modding a replacement
Reply with quote
 
I've got a drive, which I think is a BenQ DH-16W1P.
I've had a look at the tutorials on here, XS, and some archive of PSXBASE, which all say that I need to wire up several signals to the power connector for things to work. I've found a few of these on the DVD drive's board, but I can't find 'ready' and I'm not sure which is 'tray in', since there is TRINA, TRINB, TINC, etc, and a TYIN.

Here are some pictures.



100_2102[1].JPG
 Description:
 Filesize:  553.59 KB
 Viewed:  236 Time(s)

100_2102[1].JPG



100_2106[1].JPG
 Description:
 Filesize:  872.66 KB
 Viewed:  215 Time(s)

100_2106[1].JPG



100_2107[1].JPG
 Description:
 Filesize:  897.58 KB
 Viewed:  228 Time(s)

100_2107[1].JPG



_________________


View user's profile Send private message
 
 
 
 
KenM-64
V.I.P. Lifetime


Joined: Nov 06, 2013
Posts: 131

Post Posted: Sun Nov 17, 2013 11:27 pm   
Post subject:
Reply with quote
 
There are 5 signal wires, the fifth wire(status LED) is not required.
:Eject,Trayin, Trayout, Ready & StatusLED.
I have done some Samsung Drive's that were not listed in any tut's.
On these Samsung drive's.
Traystate0= Tray in.
Traystate2= Tray out.
Traystate1= Ready.
On another Samsung
IOA=Tray in.
IOD= Tray out.
IOB= Ready.

What firmware Does BenQ require for flashing.
Let me know your findings on this drive thanks.

I am a hardware person, Soldering & PCB work.(hobby)
I am not good with software,
I am looking for a person to hack firmware for the early Samsung drive.
I would like to make other drives work on Xbox's.
Maybe some of this info can help you.

[EDIT]
I can't find the fixed firmware to flash GDR-8163B drives
Can anyone help me find this firmware thanks in advance.
bios 8050L_FW_Flasher_FIXED.rar nowhere to be found, dead links.


View user's profile Send private message
 
 
 
 
SPPV
V.I.P. Lifetime


Joined: Sep 13, 2010
Posts: 2644
Location: Kamloops BC Canada

Post Posted: Mon Nov 18, 2013 6:23 pm   
Post subject:
Reply with quote
 
Im pretty sure Ive got the firmware on my server, will check and up it for you ken.

As for Benq there was never a custom firmware released for it so you will never be able to play original discs with it. Burned discs should work fine though. If it has a MediaTek chip you can try to flash it but it may just brick. Only brands of drives Ive ever seen-heard succesfuly flashed are Philips and Hitachi-LG. Benq didnt become part of Philips until 2007 so who knows.

An easy way to do it solder free is to pull the PCB from an old XBOX DVD and mount it to the top of the DVD craddle, and mount the new DVD above it. Then just have the XBOX DVD power cable plugged into the old PCB. It will pass the disc check so you dont get hit with an error screen.



Philips_firmware.rar
 Description:
Philips Firmware for flashing PC drives

Download
 Filename:  Philips_firmware.rar
 Filesize:  42.03 KB
 Downloaded:  255 Time(s)


Samsung_SDG-605_firmware.zip
 Description:
Samsung Firmware for flashing PC drives

Download
 Filename:  Samsung_SDG-605_firmware.zip
 Filesize:  55.81 KB
 Downloaded:  407 Time(s)


Mediatek-MtkWinFlash_1.5.3.3.zip
 Description:
MediaTex ATAPI Flash 1.53

Use with the Firmwares uploaded

Download
 Filename:  Mediatek-MtkWinFlash_1.5.3.3.zip
 Filesize:  157.28 KB
 Downloaded:  331 Time(s)


Mediatek-MtkFlash_1.55.zip
 Description:
MediaTex ATAPI Flash 1.55

Use with the Firmwares uploaded

Download
 Filename:  Mediatek-MtkFlash_1.55.zip
 Filesize:  15.87 KB
 Downloaded:  312 Time(s)


8050L_FW_Flasher_FIXED.rar
 Description:
8050l FW Fixed

Download
 Filename:  8050L_FW_Flasher_FIXED.rar
 Filesize:  192.41 KB
 Downloaded:  348 Time(s)


HitachiLG8050.rar
 Description:
Hitachi G8050 Firmware for flashing PC drives

Download
 Filename:  HitachiLG8050.rar
 Filesize:  165.92 KB
 Downloaded:  271 Time(s)



View user's profile Send private message
 
 
 
 
KenM-64
V.I.P. Lifetime


Joined: Nov 06, 2013
Posts: 131

Post Posted: Mon Nov 18, 2013 10:04 pm   
Post subject:
Reply with quote
 
Thanks SPPV for your help.
I am extremely happy. Very Happy


View user's profile Send private message
 
 
 
 
Prehistoricman
Moderator
Moderator

Xbox Version: 1.6 crystal
Modded: Xecuter 3

Joined: Oct 09, 2011
Posts: 406

Post Posted: Sat Nov 23, 2013 2:35 pm   
Post subject:
Reply with quote
 
So I looked around on the boards a bit more. Can't see a chip with MediaTek on it, but I may have passed it over? Would it be ones of the big ones? A TSOP chip?

An advantage of modchips is the ability to skip the DVD check - therefore no errors :)

I don't mind about playing originals really. I have all of my games saved to HDD. If I ever need to play a game, simply swap the old drive back in.

One of the reasons I'd like to put a new drive in is that my Samsung drive, one of the good ones, ejects discs while they are spinning, which doesn't look too good. Might this be one of the cables, maybe Ready, being broken?

_________________


View user's profile Send private message
 
 
 
 
KenM-64
V.I.P. Lifetime


Joined: Nov 06, 2013
Posts: 131

Post Posted: Sat Nov 23, 2013 10:34 pm   
Post subject:
Reply with quote
 
SPPV wrote:
As for Benq there was never a custom firmware released for it so you will never be able to play original discs with it. Burned discs should work fine though. If it has a MediaTek chip you can try to flash it but it may just brick.

@ Prehistoricman If it does brick, it cannot be reflashed with MTKwin flash.
You will have to take out the bios chip and flash it externally with a programer.
MTKflash will not back up your previous bios, It will be Lost for good if you flash.
Your Mediatek chip is the big one(MT1898)Controller chip, Is not a bios chip.
I can't see your bios chip in any of your pictures.

Most DVD drives, BIOS chips are housed in a 32 pin PLCC package and can be in a socket, Examples below.
There is no bios chip that i can see on your board. best not to flash that drive it may brick. You cannot play original discs with it.



Prehistoricman wrote:
One of the reasons I'd like to put a new drive in is that my Samsung drive, one of the good ones, ejects discs while they are spinning, which doesn't look too good. Might this be one of the cables, maybe Ready, being broken?

This problem can be easily fixed by spraying contact cleaner in
the tray switch that detects open close tray.
I had this same problem with a Samsung drive spiting disc's out,Ejects by its self.
This can be done to fix other drive's that just eject the tray for no reason.


Last edited by KenM-64 on Sun Jan 26, 2014 11:36 am; edited 1 time in total


View user's profile Send private message
 
 
 
 
Prehistoricman
Moderator
Moderator

Xbox Version: 1.6 crystal
Modded: Xecuter 3

Joined: Oct 09, 2011
Posts: 406

Post Posted: Sun Nov 24, 2013 12:16 pm   
Post subject:
Reply with quote
 
KenM-64 wrote:
This problem can be easily fixed by spraying contact cleaner in
the tray switch that detects open close tray.
I had this same problem with a Samsung drive spiting disc's out,Ejects by its self.
This can be done to fix other drive's that just eject the tray for no reason.


Can you take a picture of where that is so I know where to spray?

_________________


View user's profile Send private message
 
 
 
 
KenM-64
V.I.P. Lifetime


Joined: Nov 06, 2013
Posts: 131

Post Posted: Sun Nov 24, 2013 12:43 pm   
Post subject:
Reply with quote
 
There is two types of tray limit switches
The first is two vertical prongs
The second type is single lever.
Most Samsung's Drives have the two vertical prongs one
for tray close,
the other for tray open.
I will take some pictures and update my post soon.
This is Samsung PC DVD drive modded for Xbox SD-616F
Would be similar to your Samsung drive.
I got the pictures in the wrong order.
Start at the bottom picture.
Let me know if you need any help with this.
Have fun.



Loading motor & belt.jpg
 Description:
first:Remove Belt & motor screws.
 Filesize:  1.73 MB
 Viewed:  213 Time(s)

Loading motor & belt.jpg



Loading motor PCB.jpg
 Description:
Second:Turn over & un-clip the pcb from chassis
 Filesize:  2.12 MB
 Viewed:  205 Time(s)

Loading motor PCB.jpg



Motor & Tray Limit switch.jpg
 Description:
Third:Motor & Tray Limit switch.
Spray contact cleaner down the Two vertical shafts & press both repeatedly to clean.
 Filesize:  1.36 MB
 Viewed:  212 Time(s)

Motor & Tray Limit switch.jpg




View user's profile Send private message
 
 
 
 
Prehistoricman
Moderator
Moderator

Xbox Version: 1.6 crystal
Modded: Xecuter 3

Joined: Oct 09, 2011
Posts: 406

Post Posted: Sun Nov 24, 2013 4:43 pm   
Post subject:
Reply with quote
 
Thanks, I'll try this out some time over the week.
_________________


View user's profile Send private message
 
 
 
 
Prehistoricman
Moderator
Moderator

Xbox Version: 1.6 crystal
Modded: Xecuter 3

Joined: Oct 09, 2011
Posts: 406

Post Posted: Sun Nov 24, 2013 8:20 pm   
Post subject:
Reply with quote
 
SPPV wrote:
Only brands of drives Ive ever seen-heard succesfuly flashed are Philips and Hitachi-LG. Benq didnt become part of Philips until 2007 so who knows.


Just had another quick peep at the drive label. It says

Code:
Manufactured Date: March 2007
Phillips & BenQ Digital Storage Corporation

_________________


View user's profile Send private message
 
 
 
 
KenM-64
V.I.P. Lifetime


Joined: Nov 06, 2013
Posts: 131

Post Posted: Mon Nov 25, 2013 12:27 am   
Post subject:
Reply with quote
 
Prehistoricman wrote:
SPPV wrote:
Only brands of drives Ive ever seen-heard succesfuly flashed are Philips and Hitachi-LG. Benq didnt become part of Philips until 2007 so who knows.


Just had another quick peep at the drive label. It says

Code:
Manufactured Date: March 2007
Phillips & BenQ Digital Storage Corporation

It may be able to be flash with Philips Firmware,
I don't know if US Philips Xbox drive's have MediaTek Controller chips,
Our Philips drives in AU are a lot different and don't have the MediaTek chip.
AU model VAD-6035/21 Controller chip is Philips SAA7817HL
If these AU Philips drive's stop reading DVD's don't wast money replacing the laser
throw the thing in the bin, Controller Chip crapped out, it's died.
Does anyone know the other Philips model and
Controller chips part number in the US model thanks.

I am also looking for one dead Xbox Original Samsung DVD rom drive
The best one of the two Samsung's SDG-605B Model,
I have never came across one to see what they look like inside.
I already have the shit one SDG-605F reads DVD's only.
So i can work out the proper spots where data signal links go on pcb's when modding PC DVD drive's for Xbox's.


View user's profile Send private message
 
 
 
 
SPPV
V.I.P. Lifetime


Joined: Sep 13, 2010
Posts: 2644
Location: Kamloops BC Canada

Post Posted: Mon Nov 25, 2013 2:04 am   
Post subject:
Reply with quote
 
There was actualy 3 models of the Philips. 2 released in North America (v1 and v2) and a PAL edition. The N.A ones were quite good and do have a MediaTek chip. Ive heard nothing but bad things about the PAL model though. I have both v1 and 2 when I get a chance Ill pop em open and take some pics. You can easily tell a v1 from v2 just by the case. The back bottom half of a v2 is indented where as v1 isnt.
You can from this thread the quality difference of NA Philips drives
http://www.xbox-hq.com/html/postt26055.html

As for your question Prehistoricman, unless you can find a way to confirm ones been flashed before theres no way of knowing if its an actual Benq drive or if its like they do now where they just take the same drive and slap Philips on one and Benq on the other. Something else to keep in mind is thats an RW drive and far as I know the firmware flashing is for ROM drives.


Last edited by SPPV on Mon Nov 25, 2013 3:38 am; edited 1 time in total


View user's profile Send private message
 
 
 
 
KenM-64
V.I.P. Lifetime


Joined: Nov 06, 2013
Posts: 131

Post Posted: Mon Nov 25, 2013 2:23 am   
Post subject:
Reply with quote
 
Thanks man that would be great. for taking some pic's for me when you can.
Never seen what they look like inside and what controller chip they have in them.
I like to help others, Like you do man.

AU Philips drive's have that big lump on the bottom for the crappy tall laser.
I did not know there was three models of Philips out there
There had to be one good one out of them,(MT chip)


View user's profile Send private message
 
 
 
 
KenM-64
V.I.P. Lifetime


Joined: Nov 06, 2013
Posts: 131

Post Posted: Wed Dec 04, 2013 10:05 am   
Post subject:
Reply with quote
 
Dam that Philips drive is good & heavy Duty,
Had a disc smashed into the spindle and still works great,
I wont to make one of those if there is a PC equivalent to it.
do they read as good as Samsung drives,
SPPV wrote:
There was actualy 3 models of the Philips. 2 released in North America (v1 and v2) and a PAL edition. The N.A ones were quite good and do have a MediaTek chip. I have both v1 and 2 when I get a chance Ill pop em open and take some pics. You can easily tell a v1 from v2 just by the case. The back bottom half of a v2 is indented where as v1 isnt.

Thanks man that would be great. Very Happy
If you could take some pic's for me when you can.
Does V1 & V2 have different lasers & the same firmware?.

I modded the Hitachi-LG DVD Rom works ok on a stock Xbox,
reads original games & CDs & DVDs
but not as fast as a Samsungs, But just as good.


View user's profile Send private message
 
 
 
 
chadius
Xbox-HQ User
Xbox-HQ User


Joined: Jan 18, 2014
Posts: 12

Post Posted: Sun Jan 19, 2014 2:41 am   
Post subject:
Reply with quote
 
Do any of you know where I could purchase one of the hitachi drives? Maybe a model number Ken?


View user's profile Send private message
 
Display posts from previous:   
  Post new topic  
 
  Reply to topic  
Goto page 1, 2  Next |
 All times are GMT | Page 1 of 2
Jump to:  
 

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
 


Get Xbox Game Pass Ultimate