Posted: Sat Nov 20, 2004 2:15 pm Post subject: Transfer files from Laptop to Xbox??
Today i think is a day for me to remember. I got my first X-box, an x-box ready for action cause it came with xecuter 2.6 lite already installed..(i know, a true x-boxer should've installed the mod himself..)
But it seems like i got a huge problem! i have a crossover cabel, but there is no port in my laptop to support it! What can i do? How can i transfer files from my laptop to my dearly beloved x-box now!??
sjohn Moderator
Joined: Oct 16, 2004 Posts: 1472 Location: Alabama
Posted: Sat Nov 20, 2004 2:36 pm Post subject:
There are a couple ways that you can do this, firstly you can install a pcmcia card that has a network adapter, you should be able to find one for around $20 or so, check www.newegg.com The other solution would be a usb network adapter, it just plugs into usb, then you plug the network cable into it. Check the same site for those, not sure on cost on it. _________________
CTC Xbox-HQ Newbie
Joined: Nov 18, 2004 Posts: 3
Posted: Sat Nov 20, 2004 6:14 pm Post subject:
thank you!
I have acquired an usb-network adaptor, but when i connect to the xbox from my laptop the network-adaptor stops blinking, and seemingly not working. when i use flashfxp and have all the settings correct (ip: 192.168.0.1 and 255.255.255.0) it says host missing (or something). How can i get the adaptor to transfer files?
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Sun Nov 21, 2004 11:30 pm Post subject:
If you are connecting DIRECTLY between your XBOX AND LAPTOP you will need to use a 'CROSSOVER' network lead..
If you are connection between XBOX AND LAPTOP using a HUB/ROUTER/SWITCH then you shouuld use a normal NETWORK LEAD.
There is a difference.. Ask your local computer store for a crossover if you need it.. Very cheap..
I have a usb network adapter, a normal network lead (rj45) but nothing is working. when i change the settings for ip etc. in control settings and check it in "run"-> cmd ipconfig/all nothing comes up for ipadress or anything. it just says I dont have any connection. the usb network is blinking and working when i am connected to the net, but not when i unplug it from my wall and insert it in the xbox it stops blinking and it pops up on my screen that the connection is lost. I use flashfxp, but do i need any other programs aswell? i have Evox installed in my xbox.
How can i get the usb network to actually recognise my xbox and not stop blinking?
do i need any other programs?
am i a newbie? Oh, YES I AM!
Raging_Dork Xbox-HQ Newbie
Joined: Nov 08, 2004 Posts: 6
Posted: Fri Nov 26, 2004 6:20 am Post subject:
RJ45 Could mean crossover or straight. To connect your laptop directly to your xbox you need a crossover. The difference is that the send and recive wires are "crossed" to match the ports of the xbox and the laptop. send to recieve, recieve to send. If you have a straight through cable it would be send to send and recieve to recieve and nothing would work.
Also Make sure the ip you assign to your laptop isn't your xbox ip. Your laptop should have the same first 3 sets of numbers. The last number shouldn't be the same just pick a random number between 1-254 that isn't taken.
My Settings for example:
xbox: 192.168.0.4
PC: 192.168.0.70
Subnet For Both: 255.255.255.0
If I said something stupid sorry it's been a while XD
Hope this helps
forahobby Administrator
Joined: May 22, 2003 Posts: 23944 Location: NSW, Australia
Posted: Fri Nov 26, 2004 6:34 am Post subject:
hi Raging_Dork,
It all helps mate.. Sometimes another persons way of explaining things is easier to understand..
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum