Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sat Oct 30, 2004 10:00 pm Post subject: Xenium Ice 1.6, Green LED but immediate frag
Hey all, need to pick some brains here from our Xenium Ice installers. This is a first for me. I intalled a Xenium ice (pinheader) into a 1.6 machine. As soon as I turn it on, the Xenium Ice LED turns green, but I get an immediate frag. What is funny is, typically if I have a solder issue I get a red LED and the power on and off cycle three times, then the frag. This just frags right from the get go.
Not too mention, the LED is not red..it's green.
Any ideas? _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sat Oct 30, 2004 10:14 pm Post subject:
nevermind...
all good... _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Sat Oct 30, 2004 10:14 pm Post subject: yeahhh
u can not just use a pin header with xenium ice on 1.6 xbox ,
there is a whole bunch of wires you have to solder to get it to work on 1.6 ,
here is the link to the official ice installation guide for 1.6 ,http://www.teamxodus.com/modules.php?name=Downloads&d_op=getit&lid=36
if you did all the and still are having problems then i dont really know what to tell you , make sure u use bios for 1.6 box which is evox m8_16
bobrownik V.I.P. Lifetime Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Oct 21, 2004 Posts: 914 Location: PA, USA
Posted: Sat Oct 30, 2004 10:18 pm Post subject: yeahhh
one other thing i just thought of ,
the 1.6 boxes have a thick layer of some clear shit covering up all the points you need to solder to , so make sure u clean it off with GASOLINE or something that will melt that shit in an instant before you solder ,
have fun
TheModGod Xbox-Hq Legendary Xbox Version: 1.0-1.6 Modded: xenium/aladdin/x2.3/DuoX2
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sat Oct 30, 2004 11:07 pm Post subject:
I've done about thirty 1.6's...
I know about the LPC rebuild..and the thick coats of lacquer..
my problem was rather embarrassing..
I didn't realize this chip came with the newest OS...and, I was powering up by hitting the power button...not the eject button.
If I power up with the eject button I'm all good..
Quote:
if you did all the and still are having problems then i dont really know what to tell you , make sure u use bios for 1.6 box which is evox m8_16
There's no bios on the chip yet...it was fragging right after install.
BTW ppl..for those still booting up their Xenium Ice's with the 2.0 OS, here's a look at the newest OS...
erichmod02.jpg
Description:
Filesize:
18.36 KB
Viewed:
524 Time(s)
_________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum