Posted: Tue Feb 27, 2007 8:18 pm Post subject: clear cases
i notice that some folks that have the crystal cases...that you can see the dvd spinning. is this a clear replacement top for the dvd drive? or do you just take the top of the drive off and leave it open?
if thats the case...then isnt that bad for the laser and dust?
thanks
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Tue Feb 27, 2007 9:38 pm Post subject:
you have to cut the top of the dvd drive, because on the top of the case is the dvd stablizer, so you have to leave that so you kind of leave a strip across the top, leaving that stabilizer... also about dust, as long as you keep your case closed, there wont be anymore dust then before, but it probably would need a little q-tip and alcohol, everyonce in a while.. _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
joho5 Xbox-HQ Freak
Joined: Jan 22, 2007 Posts: 699 Location: Texas
Posted: Tue Feb 27, 2007 10:39 pm Post subject:
is it pretty easy to cut that piece out and make it look nice, and i guess you would just use a dremel huh?
by the way you are the top vote getter for replying to me and my noobish questions
stud_man50 Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Feb 20, 2006 Posts: 808 Location: MI, USA
Posted: Wed Feb 28, 2007 12:28 am Post subject:
ya, i just surf around here, anything i know i reply too. its not problem man... _________________ (2) XBOX v1.4:
Xecuter3CE Modchip
X3 3294 Bios
250GB Seagate HDD
XBMC Dashboard
Disclaimer: It is my intention to give the best possible advice to all forum users. However should my advice fail to be of a reasonble standard I cannot be held liable for any loss or damage caused. To act on any advice given without contemplating the consequences shows stupidity and ignorance on your behalf.
bluezone Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Sep 19, 2006 Posts: 550
Posted: Wed Feb 28, 2007 1:05 pm Post subject: Xbox
Use a dremel and files or even a mini hacksaw its the tools i use for modding.
Burner6999 Xbox-Hq Genius Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Aug 15, 2006 Posts: 1426 Location: Colorado
Posted: Wed Feb 28, 2007 6:33 pm Post subject:
Alot of clear case come with a new top that works if you have a Thompson drive. There is no cutting involved just unscrew the top then screw the new one on.
bluezone Xbox-HQ Freak Xbox Version: 1.4 Modded: Xecuter3CE
Joined: Sep 19, 2006 Posts: 550
Posted: Wed Feb 28, 2007 11:36 pm Post subject: case
yeh tru but if you have one of the crystal xboxs or the crystal limited edtion xbox you have a steel dvd drive cover like mine i havent cut mine but have cut the steel on the cases before its not hard.
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum