Posted: Tue Oct 05, 2004 8:54 pm Post subject: Pc & Xbox Connection
Hi all
I have just installed xecuter 2.6 on my 1.0 Xbox, sorted bios and done a Evox ISO on cd-rw.
My Problem:
Installed a second NIC on pc
using IP 192.168.0.1 on Xbox 192.168.0.3
Subnetmask 255.255.255.0
On PC taskbar its showing Disconnected
On Xbox Evox settings it says no link on Link Status
Not sure if that is suppose to change after making connection using
flashFXP.
I have tried making a connection with FlashFXP using Xbox Ip and usual user and password but no luck.
Had a Connector (WOL Connector i think its called) come with my chip with green/red/grey cables, do I need this installed, have no idea what its function is.
Any advise would be great
Thanks
DJB Administrator
Joined: May 23, 2003 Posts: 4031 Location: NSW, Australia
Posted: Wed Oct 06, 2004 12:38 am Post subject:
You don't need to run FlashFXP for the connection to be shown as active. Once all the hardware is set up, it should show up as connected straight away.
Sounds like possibly a fault with one of these things:
* Network Card (maybe it's dead)
* Windows (you might have to uninstall / reinstall the card)
* Network Cable (the cable might be dead)
Also, what are you using as a gateway on your Xbox? I'll guess that you should be using 192.168.0.1 (the NIC IP of your PC), or if you're connected to a router use the router's IP as the gateway.
Hope this can sorta get the ball rolling a bit...
Hexadecimal Xbox-HQ Newbie
Joined: Oct 04, 2004 Posts: 6 Location: UK
Posted: Wed Oct 06, 2004 1:54 am Post subject:
Yep NIC is DOA
Just my luck lol
I should be fine now
Cheers
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
HQ Network: 8,740 | 
Guests: 1227 | 
Members: 2 
Forums 
