Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sun Oct 03, 2004 3:12 am Post subject: Here's a first, Xenium Ice 1.4, chip not firing up
Hey all, if anyone was watching my cam in the last hour and could read lips...hehehe..
Anyway, just chipped a 1.4 with a Xenium Ice...all looks great, was a very clean install. No dark solder, using the D0 loom. Ground is great, D0 is tight and clean.
When I boot up xbox it just goes right to the MS Dash. No LED on chip, no frag, just like it's an unmodded box.
Any ideas? I am open to suggestions.
later all
realmccloy
-----------------------
http://www.xbox-hq.com http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
PorscheXboxster V.I.P. Member
Joined: Apr 21, 2004 Posts: 1067 Location: Virginia, USA
Posted: Sun Oct 03, 2004 4:00 am Post subject: Re: Here's a first, Xenium Ice 1.4, chip not firing up
realmccloy wrote:
Any ideas? I am open to suggestions.
Yeah! Slap an Xecuter in 'er! _________________ The World's Most Awesome Xbox 360 Room
[X X X X X X . . . .]% complete
-----------------------------------------
Xbox 360 x 2
V1.0???
---
Xbox v1.4 Halo
X2.3Blite
4981.06
---
Xbox v1.4 Non-Halo
X2.3B
4983.06
PorscheXboxster V.I.P. Member
Joined: Apr 21, 2004 Posts: 1067 Location: Virginia, USA
Posted: Sun Oct 03, 2004 4:02 am Post subject:
Sorry! You were probably looking for USEFUL suggestions, weren't you?
I'll have to check out your camera! When does "Mod Girls Gone Wild" air? _________________ The World's Most Awesome Xbox 360 Room
[X X X X X X . . . .]% complete
-----------------------------------------
Xbox 360 x 2
V1.0???
---
Xbox v1.4 Halo
X2.3Blite
4981.06
---
Xbox v1.4 Non-Halo
X2.3B
4983.06
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sun Oct 03, 2004 4:39 am Post subject:
Hehehe...
Well, after assuming it was a ground issue with my D0 loom I decided to redo the ground...still no joy.
I thought okay, just like forahobby mentioned in the VIP ticket that I finally found my first dud chip. I mean, I have installed tons of these things and this is the first with no fire.
If it was my solder job, it would have fragged. So, I pulled a chip out of another machine and tested in this..guess what... NO JUICE!
Now I am super perplexed..yes, I have a big SP on my chest...but before I regress any further, I actually got it to work.
Common knowledge was if you have a Focus chip you either have a 1.4 or 1.5 xbox. The only way you are supposed to know the difference between the two is to check for continuity between the number 2 LPC hole and any ground. If you have continuity, it's a 1.4. If you have continuity it's a 1.5. I had continuity, so I assumed it was a 1.4.
WRONG...it was a 1.5 and I had to rebuild the LPC on the top unlike the LPC rebuild of the 1.6 which is on the bottom of the mobo.
I have fire, I have joy...I have utter confusion how the freak I am supposed to tell the difference between a 1.4 or a 1.5 in the near future.
I took pics and as soon as I get my FTP prefs back in order (I restored my PC today) I will post so everyone knows where to put the dang wires.
later all
realmccloy
--------------------
http://www.xbox-hq.com http://www.themodgod.com _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
Slamscaper Xbox-HQ Freak
Joined: Jun 24, 2004 Posts: 658 Location: Melbourne, FL
Posted: Sun Oct 03, 2004 4:48 am Post subject:
Ya know something funny? Everytime u post a problem up here RM, u end up getting it figured out urself lol. This is like the 6th post Ive seen just like this. Your getting too good at this stuff.....well that is a good thing lol.
ttyl. _________________ SE Halo Xbox v1.4 :
Xenium Ice Modchip
Xecuter2 Bios 4983.67
EvoX Dashboard 3935
Philips DVD Drive
250GB Western Digital HDD
Logitech Cordless Precision Controller
PorscheXboxster V.I.P. Member
Joined: Apr 21, 2004 Posts: 1067 Location: Virginia, USA
Posted: Sun Oct 03, 2004 4:50 am Post subject:
realmccloy wrote:
If you have continuity it's a 1.5.
Did you mean NO continuity? _________________ The World's Most Awesome Xbox 360 Room
[X X X X X X . . . .]% complete
-----------------------------------------
Xbox 360 x 2
V1.0???
---
Xbox v1.4 Halo
X2.3Blite
4981.06
---
Xbox v1.4 Non-Halo
X2.3B
4983.06
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sun Oct 03, 2004 5:06 am Post subject:
correct, I was backasswards _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
TheModGod Xbox-Hq Legendary
Joined: Apr 18, 2004 Posts: 5303 Location: Greensburg PA
Posted: Sun Oct 03, 2004 5:41 am Post subject:
Quote:
Ya know something funny? Everytime u post a problem up here RM, u end up getting it figured out urself lol.
HA..didnt see that one first...yeah, I know. I keep trying to troubleshoot, but I also get some posts out there in the event I get stumped and one wiser than I has a quick fix.
I use as many resources as I can for the fastest fixes...I am soooooo impatient when it's not working right! HA.
later man _________________ Good Deals: Death@Hand, funkydopenloven, StaticMind, Slamscaper, PorscheXboxter
Bad Deals: None Yet
Pending Deals: Vanguard
PorscheXboxster V.I.P. Member
Joined: Apr 21, 2004 Posts: 1067 Location: Virginia, USA
Posted: Sun Oct 03, 2004 11:33 am Post subject:
Well, keep posting your problems, along with your own solutions. I'm learnin' from 'um. What I've learned from this thread: Don't waste your time modding a v1.6. Give it to RM and let HIM waste his time! _________________ The World's Most Awesome Xbox 360 Room
[X X X X X X . . . .]% complete
-----------------------------------------
Xbox 360 x 2
V1.0???
---
Xbox v1.4 Halo
X2.3Blite
4981.06
---
Xbox v1.4 Non-Halo
X2.3B
4983.06
|
All times are GMT |Page 1 of 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum